AmeriCuda Racing

AmeriCuda Racing 1969 Plymouth Barracuda tube chassis racecar w/440 BB Mopar, Nitrous, & a Glide driven by Danger D

Was a good day of testing at Rock Falls Raceway with AmeriCuda Racing. Last run of the day had a perfect reaction time. ...
08/16/2024

Was a good day of testing at Rock Falls Raceway with AmeriCuda Racing. Last run of the day had a perfect reaction time.

Once in a while the AmeriCuda has to make an appearance at a car show.  However this coming Friday August 16th we'll be ...
08/13/2024

Once in a while the AmeriCuda has to make an appearance at a car show. However this coming Friday August 16th we'll be racing Rock Falls Raceway. Stop by and say hi!

Just starting my build on a welding/ fabrication table for the shop.  48x48. 5 inch total lock casters. 38.5 inches tall...
07/31/2024

Just starting my build on a welding/ fabrication table for the shop. 48x48. 5 inch total lock casters. 38.5 inches tall. ¼ plate with ¼ thick 2 inch angles welded underneath for extra strength every 12 inches. Lower shelf as well which doubles as a stiffner for the 2x2 ¼ legs.

Picture of the americuda because why not 😆.

Some of the cool cars today at Street Machine Summer Nationals St Paul
07/21/2024

Some of the cool cars today at Street Machine Summer Nationals St Paul

Met one of the nicest car guys around at the show today.  Great chatting with you Mike Cotten !
07/19/2024

Met one of the nicest car guys around at the show today. Great chatting with you Mike Cotten !

Beautiful day at the Street Machine Summer Nationals
07/19/2024

Beautiful day at the Street Machine Summer Nationals

Did some electrical troubleshooting today.  Everything checked out OK. Resistance in my coil was within spec, plugs look...
07/14/2024

Did some electrical troubleshooting today. Everything checked out OK. Resistance in my coil was within spec, plugs looked good, wires tested within spec, voltage was good at the MSD. LED lights on msd working as they should.

Not really sure why it died a few times on Friday at this point? Tried to recreate the heat soaking by running it up to temp, shutting it down and repeating to see if that would recreate the issue but no luck getting the issue to surface again.

Unfortunately, the test and tune ended early after the second run due to an unknown electrical issue that caused AmeriCu...
07/13/2024

Unfortunately, the test and tune ended early after the second run due to an unknown electrical issue that caused AmeriCuda to shut off before returning to the staging lanes for a third run. Either the MSD Digital 6 failed or the coil. Tomorrow I'll dig into it and find out.

07/11/2024

This Friday AmeriCuda will be at Rock Falls Raceway for the test n tune. Pending weather I'll be there Saturday as well for the bracket race.

06/27/2024

Hawk tuah girl was helping at Rock Falls Raceway


06/25/2024

When race weekend is just around the corner!

Test and tune Rock Falls Raceway!
06/07/2024

Test and tune Rock Falls Raceway!

Is there anything better than being at the track on a Friday morning instead of at work?!
05/22/2024

Is there anything better than being at the track on a Friday morning instead of at work?!

Few more pictures of AmeriCuda at the track
05/20/2024

Few more pictures of AmeriCuda at the track

  1969 Plymouth Barracuda with a 440 and nitrous.
01/11/2024


1969 Plymouth Barracuda with a 440 and nitrous.

Can't wait for 2024 Race Season!
12/07/2023

Can't wait for 2024 Race Season!

Rock Falls Raceway - Best Drag Racing in the Midwest!

Can't wait to run the AmeriCuda with the rebuilt convertor.  Hopefully drops a few tenths and picks up some mph.        ...
09/14/2023

Can't wait to run the AmeriCuda with the rebuilt convertor. Hopefully drops a few tenths and picks up some mph.

Out with the old torque convertor. Hopefully the new one will handle the power better so no more flashing to the rev lim...
09/03/2023

Out with the old torque convertor. Hopefully the new one will handle the power better so no more flashing to the rev limiter.

The AmeriCuda along with Raymond Riedl aka Bam Bam and his dragster and procharged nitrous Chevy pickup will be at Rock ...
08/18/2023

The AmeriCuda along with Raymond Riedl aka Bam Bam and his dragster and procharged nitrous Chevy pickup will be at Rock Falls Raceway August 25th-27th.

Stop by to hang out and watch the Summit race series bracket race 7 & 8.

The Summit Racing ET Bracket Series continues with races 7 & 8!

Tickets and online registration available at rockfallsraceway.com/bracket-series

First race with the AmeriCuda at Brainerd International Raceway this spring 2023
08/16/2023

First race with the AmeriCuda at Brainerd International Raceway this spring 2023

Brotherhood of Street Racers Charity car show this last weekend
08/16/2023

Brotherhood of Street Racers Charity car show this last weekend

Welcome to my page for racing the AmeriCuda and working on it.
08/15/2023

Welcome to my page for racing the AmeriCuda and working on it.

Address

Hammond, WI

Alerts

Be the first to know and let us send you an email when AmeriCuda Racing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to AmeriCuda Racing:

Videos

Share

Nearby media companies


Other Hammond media companies

Show All