Scope-Werks.com

Scope-Werks.com Custom rifle scope sidewheels, turrets, and ballistic software.

03/17/2024

The magnetic mount in action on an Athlon Optics Heras scope..

Special order five inch magnetic mount cutaway eccentric for the Athlon Optics Heras scope. The cutaway allows for left...
03/17/2024

Special order five inch magnetic mount cutaway eccentric for the Athlon Optics Heras scope. The cutaway allows for left-hand magazine access.
Also making its debut is the new ABS pointer.

10/14/2023

This newly designed 6” eccentric magnetic mount wheel pops on and off of the Athlon Heras scope. It’s securely held in place with absolutely no slop.
(Sorry I held my phone the upside down…)

After having produced the five inch eccentric magnetic, the next step was to do the same with the six inch. This one wa...
10/13/2023

After having produced the five inch eccentric magnetic, the next step was to do the same with the six inch. This one was made for the Athlon Heras, shown in natural aluminum as well as after powder coating.

10/03/2023

Magnetic mount eccentric side wheel. Last video of series.
I’ve been developing a magnetic mount eccentric side wheel in north five inch and six inch diameters. This is the first production five inch going out to the customer for his Athlon Optics Midas TAC scope.
Snaps into place and absolutely no slop.

10/03/2023

Magnetic mount eccentric side wheel finish pass. Third video of series.

10/03/2023

Magnetic mount eccentric side wheel. Second video of series.
Roughing out material.

10/03/2023

Magnetic mount eccentric side wheel. First video of series.
Roughing out the bore.

07/03/2022

First step on making Bushnell 4200 focus doughnuts; CNC the finish OD and rough the ID. Afterwards, machine the I.D., face both sides, chamfer both OD edges, counter drill, clearance drill, tap drill, tap and then finally slit. As simply as these look, they take a ton of labor and setup.
Blowing though a full depth 1/4" cut always involves a certain amount of 'pucker factor'.

Just finished a small batch of Bushnell 4200 focus doughnuts . A video will follow soon..
07/03/2022

Just finished a small batch of Bushnell 4200 focus doughnuts . A video will follow soon..

Porsche Magnetic mount before powder coating
04/27/2022

Porsche Magnetic mount before powder coating

04/27/2022

Porsche Magnetic mount chamfering.

04/27/2022

Porsche Magnetic mount.

Created a custom magnetic mount wheel for a customer. This one mimics the look of a Porsche mag wheel. A few videos abo...
04/27/2022

Created a custom magnetic mount wheel for a customer. This one mimics the look of a Porsche mag wheel. A few videos above as well.

80mm Element Helix/Nexus Sidewheel.Two stages to get to this point. First is cutting the raw blank for a bar of round s...
03/22/2022

80mm Element Helix/Nexus Sidewheel.
Two stages to get to this point. First is cutting the raw blank for a bar of round stock with subsequent lathe work to create the raw wheel. Second, mounting the wheel to the CNC table, indicating it in to find the center and let the CNC cuts the openings. Next comes the hand spot drilling, drilling and then tapping the set screw holes. Final operation is hand deburring and cleanup.

03/22/2022

80mm Element Helix sidewheel in the making

5” Magnetic Lotus.
04/05/2021

5” Magnetic Lotus.

04/05/2021

5” magnetic Lotus, almost ready to ship.

Address

Brighton, MI
48116

Telephone

(734) 956-0464

Website

Alerts

Be the first to know and let us send you an email when Scope-Werks.com posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Videos

Magnetic mount eccentric
Magnetic mount eccentric

The magnetic mount in action on an Athlon Optics Heras scope..

Popping the six inch eccentric wheel into the Athlon Heras scope
Popping the six inch eccentric wheel into the Athlon Heras scope

This newly designed 6” eccentric magnetic mount wheel pops on and off of the Athlon Heras scope. It’s securely held in place with absolutely no slop. (Sorry I held my phone the upside down…)

Snapping into place
Snapping into place

Magnetic mount eccentric side wheel. Last video of series. I’ve been developing a magnetic mount eccentric side wheel in north five inch and six inch diameters. This is the first production five inch going out to the customer for his Athlon Optics Midas TAC scope. Snaps into place and absolutely no slop.

Finish pass
Finish pass

Magnetic mount eccentric side wheel finish pass. Third video of series.

More rough machining
More rough machining

Magnetic mount eccentric side wheel. Second video of series. Roughing out material.

Roughing out the bore
Roughing out the bore

Magnetic mount eccentric side wheel. First video of series. Roughing out the bore.

First step on making Bushnell 4200 focus doughnuts; CNC the finish OD and rough the ID. Afterwards, machine the I.D., face both sides, chamfer both OD edges, counter drill, clearance drill, tap drill, tap and then finally slit. As simply as these look, they take a ton of labor and setup. Blowing though a full depth 1/4" cut always involves a certain amount of 'pucker factor'.

Porsche Magnetic mount chamfering.

Porsche Magnetic mount.

CNC machining
CNC machining

80mm Element Helix sidewheel in the making

First 5” Magnetic Mount Lotus wheel!
First 5” Magnetic Mount Lotus wheel!

5” magnetic Lotus, almost ready to ship.

MagWheel holding power!
MagWheel holding power!

Great holding power with only three thick magnets.

Shortcuts

Share