Odin Innovations

Odin Innovations We see things differently. Would you sacrifice an eye to see the world differently? Legend has it, one of us is a little more like Odin than you might think.

Where we might not willingly give up an eye for a drink from the well of wisdom like Odin did, we do have a thirst for the pursuit of knowledge. We, at Odin Innovations, are dedicated to designing innovative products and finding creative solutions to adapt into our ever-changing world.

On the 8th day of Christmas....
12/09/2021

On the 8th day of Christmas....

Day 8 is something I have wanted for a while!Check out our sponsor, SS Airsoft! Don't forget to use "C7VIPER" at check-out for 10 percent off!https://bit.ly/...

We are excited to offer an improved M12 Sidewinder Speedloader! The PTS distributed version features an O-ringless nozzl...
06/04/2021

We are excited to offer an improved M12 Sidewinder Speedloader! The PTS distributed version features an O-ringless nozzle to allow for reduced loading resistance when using the EPM1 magazines. PTS has specified that the M12 Sidewinders they distribute will have internal components that are made from a reinforced polymer to enhance the strength and durability of the loader.



If you want to load your EPM1 rapidly, you certainly need the Odin - Innovations - M12 Sidewinder Speed Loader. It enable you to load up to six PTS EPM1 AEG and optmise for AR-15, EPM1 and EPM1-S. Take action now!

Odin - Innovations - M12 Sidewinder Speed Loader: https://bit.ly/3wBlp6y

For more detail, please visit
International: https://www.ptssyndicate.com/
USA: http://www.ptssyndicate.us/

We are excited to be going to Operation Stonebreaker this year! Hope to see you there!
03/11/2021

We are excited to be going to Operation Stonebreaker this year! Hope to see you there!

01/20/2021

Have you seen the new EPM1-S?

It has come to our attention that a batch of M12 Sidewinders has been produced with a BB detent that is too tight. This ...
11/09/2020

It has come to our attention that a batch of M12 Sidewinders has been produced with a BB detent that is too tight. This has been making it difficult to load magazines fully, including the EPM1. We can assure you these two products were designed with each other in mind. Here are some suggestions for a temporary fix as we are working on a permanent solution for those who think they may have gotten a M12 Sidewinder from this batch.

If you are having trouble loading magazines with your M12 Sidewinder, take a step back to find out how your speedloader is behaving without a magazine insert...

10/27/2020

We know many of you are excited to use your M12 Sidewinder with the new EPM1 magazines!! We certainly can't imagine loading 250rnds with a thumb loader. Due to the EPM1's seriously high capacity, we recommend making sure your M12 Sidewinder clutch is properly adjusted to handle filling your magazines completely. Do not simply tighten your clutch, proper clutch adjustment instructions can be found on our "Troubleshooting" page on our website. https://www.odininnovations.com/troubleshooting

10/21/2020

The largest capacity midcap airsoft magazine in the world.... can't argue with that.

Pre-order now, shipping starts Oct. 8.
10/06/2020

Pre-order now, shipping starts Oct. 8.



120 round, 150 round, 200 round, do you want more?
250 round can only be found in EPM1

Pre-order Now‼️ Start shipping on Oct 8‼️

Hey guys if you could not get the EPM1 from our official channel pls visit your local dealer.

Item Code:
PT167450307 - Black
PT167450313 - Flat Dark Earth

For more detail, please visit
International: https://www.ptssyndicate.com/
USA: http://www.ptssyndicate.us/

It is exciting to be part of many "Firsts"!
10/03/2020

It is exciting to be part of many "Firsts"!

07/15/2020

We have been getting quite a few inquiries regarding product. We wanted to first thank all who continue to support us and are enthusiastic to see innovative products. Unfortunately, Covid-19 has really slowed down the production of the M12 Sidewinder and the Transformer, but we are continually trying to move forward during these trying times. The good news is the PTS EPM1 mags are currently in production! However, we do not know an exact date when they will be in the states or when they will be available internationally. We assure you as soon as WE know any information, YOU will know the information, so please keep checking back.

SHOT show 2020 is coming to an end. Last chance to come check the EPM1 and the Shorty EPM1 out at the PTS booth 4343.
01/24/2020

SHOT show 2020 is coming to an end. Last chance to come check the EPM1 and the Shorty EPM1 out at the PTS booth 4343.

NEW EPMs
EPM-G
EPM-LR
EPM Shorty
FAST MOUNT
Omen

EPM1's are finally here! The first 1000 will be headed to retailers in early February. Capacity is 250 rounds and MSRP $...
01/22/2020

EPM1's are finally here! The first 1000 will be headed to retailers in early February. Capacity is 250 rounds and MSRP $29.99. If you have any more questions, head to the PTS booth 4343 at SHOT Show 2020 and just ask!

Come pick up a copy of the PTS Times! We know you have been anxiously awaiting the EPM1 mags. See us at SHOT Show 2020,...
01/20/2020

Come pick up a copy of the PTS Times! We know you have been anxiously awaiting the EPM1 mags. See us at SHOT Show 2020, Booth 4343, to find out more.

Swing by booth 4343 and get your copy of the PTS TIMES!!!📰💥

Address

Aurora, CO
80012

Website

Alerts

Be the first to know and let us send you an email when Odin Innovations posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share