PSC Civil Engineering

12/05/2024

Distribution of shear intensity over a rectangular section of a beam, follows:
A. A circular curve
B. A straight line
C. A parabolic curve
D. An elliptical curve

04/05/2024

While measuring a chain line between two stations A and B intervened by a raised ground
a.vision gets obstructed
b.chaining gets obstructed
c.both vision and chaining get obstructed
d.all the above.

15/04/2024

The most desirable alignment of an irrigation canal is along;
A. A contour line B. The ridge line
C. The valley line D. None of the above

07/04/2024

Stirrups bar in RCC beam is provided to resist
A. Bending moment
B. Shear force
C. Axial force
D. All of the above

06/04/2024

Permissible compressive strength of M 150 concrete grade is
A. 100 kg/cm2
B. 150 kg/cm2
C. 200 kg/cm2
D. 250 kg/cm2

06/04/2024

The age of a tree can be known by examining:-
a.Cambium layer
b.Annular rings
c.Medullary rays
d.Heart wood

03/04/2024

31/03/2024

Naae paxi ke garne na t?

31/03/2024

Contours are the lines that join the points of equal:
A. Dimension
B. Pressure
C. Elevation
D. Temperature

29/03/2024

Tacheometer is best suited
A. for extermely accurate survey
B. in broken grounds
C. where chaining is impossible
D. for population areas

29/03/2024

Terracotta is essentially:
A. an igneous rock
B. a sedimentary rock
C. a clay product
D. a burnt up brick

28/03/2024

Area limit for a survey to be called plane survey is:
A. 195 sq km
B. 360 sq km
C. 430 sq km
D. 500 sq km

28/03/2024

In an over reinforced concreted section, the failure starts at:
A. compression face
B. tension face
C. neutral axis
D. all of the above.

27/03/2024

The particle size of clay is
A.

26/03/2024

The slenderness ratio for masonry walls ……….. should not be more than
A. 20
B. 30
C. 10
D. 12

26/03/2024

The grade of concrete generally not used in reinforced concrete structure is:
A. M10
B. M15
C. M20
D. M40

25/03/2024

The best hydraulic channel cross-section is the one which has a
A) minimum roughness coefficient
B) least cost
C) maximum area for a given flow
D) minimum wetted perimeter

25/03/2024

𝐹𝑎𝑡𝑖𝑔𝑢𝑒 𝑖𝑠 𝑡ℎ𝑒 𝑓𝑎𝑖𝑙𝑢𝑟𝑒 𝑜𝑓 𝑎 𝑚𝑎𝑡𝑒𝑟𝑖𝑎𝑙 𝑢𝑛𝑑𝑒𝑟:
𝐴. 𝑐𝑜𝑛𝑠𝑡𝑎𝑛𝑡 𝑙𝑜𝑎𝑑 𝑏𝑢𝑡 𝑜𝑐𝑐𝑎𝑠𝑖𝑜𝑛𝑎𝑙𝑙𝑦 𝑤𝑒𝑙𝑙 𝑎𝑏𝑜𝑣𝑒 𝑠𝑡𝑎𝑡𝑖𝑐 𝑙𝑜𝑎𝑑
𝐵. 𝑣𝑎𝑟𝑦𝑖𝑛𝑔 𝑙𝑜𝑎𝑑𝑠, 𝑤𝑒𝑙𝑙 𝑏𝑒𝑙𝑜𝑤 𝑢𝑙𝑡𝑖𝑚𝑎𝑡𝑒 𝑠𝑡𝑎𝑡𝑖𝑐 𝑙𝑜𝑎𝑑
𝐶. 𝑐𝑜𝑛𝑠𝑡𝑎𝑛𝑡 𝑙𝑜𝑎𝑑𝑠 𝑤𝑒𝑙𝑙 𝑏𝑒𝑙𝑜𝑤 𝑢𝑙𝑡𝑖𝑚𝑎𝑡𝑒 𝑠𝑡𝑎𝑡𝑖𝑐 𝑙𝑜𝑎𝑑
𝐷. 𝑣𝑎𝑟𝑦𝑖𝑛𝑔 𝑙𝑜𝑎𝑑𝑠 𝑤𝑒𝑙𝑙 𝑎𝑏𝑜𝑣𝑒 𝑢𝑙𝑡𝑖𝑚𝑎𝑡𝑒 𝑠𝑡𝑎𝑡𝑖𝑐 𝑙𝑜𝑎𝑑