Bintang sejati

31/07/2017

03/07/2017

https://pucuksolder.blogspot.co.id/2017/07/apa-itu-matv.html

radio komunitas desa permanu, informasi seputar kondisi desa permanu dan sekitarnya ,hiburan dan budaya info whatsapp 0818 530 449

23/06/2017

23/06/2017

PERATURAN KOMINFO NOMOR 31 TAHUN 2014,KOMINFO TAHUN 2014,PERATURAN KOMINFO TAHUN 2014,KOMINFO

23/06/2017

Cara setting dvr conek ke internet

P2P Operation Manual
Welcome
Thank you for using our P2P function!
This operation manual is designed to be a reference tool for your system.
Please keep it well for future reference.
Before your operation please read the following instructions carefully.
Before the operation, please make sure the device is online. The device shall be in a LAN or WAN that can access to the internet.
The internet access port is enabled. The default port includes 80, 554, and 37777. Please refer to the user’s manual if you want to change the port value.
Device default user name is admin and password is admin. For security reasons, please change the user name and password after you first logged in.
Device default IP address is 192.168.1.108.
Keep the SN and QR label well.
P2P website is www.easy4ip.com
Device supports surveillance and P2P function via the cell phone too. Please download the corresponding APP first.

1 About P2P
1.1 Overview
P2P function allows you to scan the QR code and then access the device. It is free of dynamic domain application, port mapping, or proxy. You can easily watch the child, share the happy moment with your friends, or take care of the pet or store. All activities are unfolded before your eyes.
1.2 Features
Quick installation. Scan QR and sign in. Just three steps.
Cell phone applications. Watch video from anywhere at anytime just as you like.
Convenient management. One account to manage various devices.

Our network camera, DVR, NVR series product and cell phone app supports P2P function.
2 P2P Settings
2.1 WEB
Please follow the steps listed below.
a) Login the WEB, from Setup->Network->TCP/IP->P2P; you can go to the following interface. See Figure 2-1.

b) Check the box here to enable P2P function.
c) Click Save button.

2.2 Local Settings
Note
This chapter is for NVR and DVR series product. Slight different may be found in the interface. The following operation is based on the NVR product. For other series product, please refer to corresponding user’s manual.
Please follow the steps listed below.
a) From main menu->Setup->Network->P2P, you can see the following interface See Figure 2-2.

b) Check the box to enable P2P function.
c) Click Save button.

3 Cell Phone Client
3.1 Download
Before the operation, please download the corresponding client to your cell phone.
There are two OS: Android/IOS. Please check you cell phone OS and download the corresponding client.
3.1.1 Android
For Android cell phone, you can go to our official website to download or scan the following QR code. See Figure 3-1.

3.1.2 Iphone
For iphone cell phone, you can go to the App store and then search idmss. It includes Idmss Lite (free) and Idmss Plus (need to pay fee).
Or you can scan the following QR code. See Figure 3-2.

3.2 Operation
Please follow the steps listed below.
a) Install the corresponding client and run.
b) Click to go to the main menu. See Figure 3-3.


c) In Figure 3-3, select , you can add/modify/delete device and control the device alarm output.
d) Click to add device. See Figure 3-4.


e) Click register mode and then select P2P. Click scan QR code button to scan the QR code from the device (such as network camera) or from GUI (such as DVR, NVR). See Figure 3-5.


f) After scan, you can view the product SN. Click the Start live preview button, now you can see the following interface. See Figure 3-6.

23/06/2017

https://youtu.be/7338ccIkeUw

Tidak Perlu Operasi Dan Kemoterapy !! Rahasia Obat Ajaib Kanker Ternyata Ada di Sekitar Kita !! Selamat datang di channel kami yang berisi info tentang tanam...

09/06/2017

LDU40J
Technical Specification Summary
Frequency Range 470-862MHz Typ. Gain 17 dB
P1dB 40 W Typ. Efficiency >20 % At 1dBcp
Analogue TV 40 Wps Temperature Range -5 to +45C
DVB-T/H 10 Wrms Max VSWR 3:1
DTV Working Class AB
Dual tone 80 Wpep Supply Voltage 30 V
Devices: MRFE6S9045N or equivalent
Key Features and functions
> Temperature compensated bias
>Manual operated bias circuit or SmartBias® Infrared (Option)
> High temperature protections
General Description
Actual Power Amplifier Picture
LDU40J GR04870
This linear power amplifier pallet has been designed to cover the entire UHF TV band from 470 to
862MHz, offering OEMs a single, unsurpassed solution for their low power amplifier designs. Designed
for analog and digital applications, the LDU40J incorporates microstrip technology and the latest
generation of LDMOS power devices for increased ruggedness and reliability. Patented bias control (IR
SmartBias®, optional).
Release Date

Electrical Specifications
Parameter Min. Typ. Max Units Notes
Frequency 470 862 MHz Full coverage without tuning
P1dB 40 W
Power 80 Wpep
Power Input 0,2 W
Gain 17 dB At 10Wrms
V Supply 30 Vdc
Drain Current 2,3 A
Input return loss -16 dB
Phase Variation +/-5% Unit to unit
Gain Variation +/-1 dB
F2 Second Harmonic -35 dBc
F3 Third Harmonic dBc
Baseplate Temp. -5 +45 C
Analog Power (ATV) 40 Wps common amplification
Digital Power (DVB) 10 15 Wrms
M.E.R. (DVB) 38 dB Without Precorrection
Shoulders (DVB) -40 -41 dBc @ 10Wrms [ +/-4,2MHz ]

09/06/2017

LDU20-RV2

Technical Specification Summary
Frequency Range 470-862MHz Typ. Gain 16 dB
P1dB 30 W Typ. Efficiency 40% @1 dB cp
Analogue TV 20 Wps Temperature Range -10 to +55C
DVB 5 Wrms Max VSWR 3:1
DTV 6,5W Working Class AB
Dual tone 40 Wpep Supply Voltage 26,5 V
Devices: PTFA220121M or equivalent
Key Features and functions
> Temperature compensated bias
> SmartBias® Infrared or Manual operated bias circuit (Option)
> High temperature protections
General Description
Actual Power Amplifier Picture
LDU20-RV2 GR04650
This ultra linear power amplifier pallet has been designed to cover the entire UHF TV band from
470 to 862MHz, offering OEMs a single, unsurpassed solution for their low power amplifier
designs. Designed for analog and digital applications, the LDU20-R incorporates microstrip
technology and the latest generation of LDMOS power devices for increased ruggedness and
reliability. Patented bias control (IR SmartBias®, optional). The Matching circuit offers the
smallest footprint available today vs. power output.

Electrical Specifications
Parameter Min. Typ. Max Units Notes
Frequency 470 862 MHz Full coverage without tuning
P1dB 30 40 W
Power 40 Wpep
Power Input 1 W
Gain 16,3 16,5 dB @ 20Wcw
V Supply 26,5 28 Vdc
Drain Current 2,4 Adc @ 20Wps
Input return loss -14 dB
Phase Variation +/-7,5 ° Unit to unit
Gain Variation +/-0,75 dB
F2 Second Harmonic -35 -25 dBc
F3 Third Harmonic -45 -30 dBc
Baseplate Temp. -10 +75 C

09/06/2017

LDU01 GR04390
Technical Specification Summary
Frequency Range 470-862MHz Typ. Gain 17 dB
P1dB 1 W Typ. Efficiency
Analogue TV NA Temperature Range -10 to +75 °C
DVB 100 mWrms Max VSWR 3:1
DTV Working Class A
Dual tone Supply Voltage 28V
Devices:
General Description
Actual Power Amplifier Picture
Typical Class A
LDU01 GR04390
MMIC: AH202, 1W High Linearity Amplifier from WJ
This power amplifier pallet has been design to cover the entire UHF TV band from 470 to 862 MHz.
Designed for digital applications, the LDU01 is a low level amplifier stage to provide a 50mW with
a very linera signal or 100mW @ typ. 45dBc of shoulder.

Electrical Specifications
Parameter Min. Typ. Max Units Notes
Frequency 470 862 MHz
P1dB 1 W CW Mode
Power 1 Wpep 2 tones, 100kHz spacing (-30dBc)
IMD3 -30 dBc 2 tones, 100kHz spacing (1Wpep)
Power Input 20 mW CW
Gain 16,8 17 dB
V Supply 28 Vdc
330 mA
Input return loss -12 -15 dB
F2 Second Harmonic -35 -25 dBc
F3 Third Harmonic -45 -30 dBc
Baseplate Temp. -10 +75 C
ABSOLUTE Maximum Ratings
Parameter Value Units Notes
Output Power 1 W
Input Power 20 mW
Operating Voltage 28 Vdc
Stable operations 28 - 30 Vdc
Supply Current 330 mA
VSWR 3:1
Storage Temp. -20 +80 C
Base Plate temp. 75

09/06/2017

CARA PERBAIKAN TRANSMITER RES UHF AU301-DP GR03490

Product Name Manufacturer's Part Number
Frequency Range 470-862MHz Typ. Gain 56 dB
P1dB 1900 W Typ. Efficiency > 40% At 1dBcp
Analogue TV 1400 Wps Temperature Range -5 to + 45 ºC
DVB 430 Wrms Max VSWR 3:1
DTV 560 Wrms Working Class AB
Two tone 1600 Wpep Supply Voltage 43,0 V
Full LDMOS Power Amplifier
1400 W ps Out
430 Wrms Out DVB-T
DTV (8 VSB): 560Wrms
BroadBand (470-862 MHz)
No internal cabling
Easy maintenance without special tools
RS232-RS485 interface
Control software included
Extremely strong mechanical structure
Requires external PSU (see PS200-D series from Res-Ingenium)
Technical Specification Summary
Key Features and Functions
General Description
Actual Power Amplifier Picture
AU301-DP is a full LDMOS Broadcast Power Amplifier specifically designed for digital applications.
The unit is the state of the art in terms of easy assembly, reliability and performances. The complete
unit is compliant to all relevant international standards.
Release Date 02/02/2011 File: AU301-DP_Datasheet_Rev 4 Page 1 of 10
Parameter Min. Typ. Max Units Notes
Frequency 470 862 MHz Full coverage without tuning
P1dB 1900 W In CW mode
Power 1600 W PEP 2 tones, 1 kHz spacing (-30 dBc)
IMD3 -33 dBc 2 tones, 1 kHz spacing (1,6 kW PEP)
Power Input 7 dBm Max value in CW mode @ 1dBcp
Gain 56 dB At 1600 W PEP / 430 W rms DVB-T
V Supply 43 Vdc By External Power Supply
Drain Current 80 Adc For 1600 W PEP
Drain Current 63 Adc For 430 Watt rms with DVB-T signal
Input return loss -14 -16 dB
Phase Variation ± 10 º Unit to unit
Gain Variation ± 2,0 dB Fine ADJ available
F2 Second Harmonic -35 -25 dBc
F3 Third Harmonic -45 -30 dBc
Baseplate Temp. -10 +75 ºC
Analog Power 1400,0 W ps Common amplification
IMD -55,0 -50,0 dBc At 1400 Wps, inside the Channel [ #]
Differential Gain 3,5 6,0 % Error at 1400 Wps [ #]
Lum. Non Lin. 4,5 7,0 % Error at 1400 Wps [ #]
Differential Phase 2,0 4,0 Deg. Error at 1400 Wps [ #]
ICPM (peak to peak) 2,5 5,0 Deg. Error at 1400 Wps [ #]
Digital Power (DTV ) 560,0 W rms
Digital Power (DVB-T) 430 450 W rms
M.E.R. (DVB-T) 30,0 dB
Shoulders (DVB-T) -33,0 -35,0 dBc At ± 4.2 MHz / 360 W rms
Shoulders (DVB-T) -30,0 -33,0 dBc At ± 4.2 MHz / 430 W rms
[ #] Analog TV signal, dual sound (-13, -20 dBc) RED field, without Precorrection
All Specifications are valid for load impedance 50 Ohm, Vdc=43.0Vdc, Idrain=78A max
Parameter Value Units Notes
Output Power 1500 W in CW mode
Input Power 7,0 dBm in CW mode
Operating Voltage 50 Vdc
Stable operations 43 Vdc
Bias Current 10,0 A Quiescent current for four LDU661 pallets
Drain Current 90 A with Tj @ 175 ºC (see the Device data)
VSWR 2:1 All phase angle / High Mismatch Protection set @ 2:1
Storage Temp. -20 + 80 ºC
Base Plate temp. 75 ºC Heatsink Temperature
RF input N female on Rear Panel
RF output 7/16 DIN female on Rear Panel
RF Monitor SMA connector on Rear Panel
RS232 Dsub 9 Pin on front and rear panel
RS485 Dsub 9 Pin on rear panel
Local Enable Switch front panel
Local Enable Two-pole connector on the rear panel
Remote control ENABLE RF Enable / Disable (On / Stand By)
Note: An output on the rear panel can manage the external Power Supply ON/OFF.
The external PS will be switched OFF in case of alarm
Electrical Specifications
ABSOLUTE Maximum Ratings
Electrical Interfaces
Release Date 02/02/2011 File: AU301-DP_Datasheet_Rev 4 Page 2 of 10
AU301-DP General data and layout Dimensions.
Physical Dimensions 19 Inch x 3 Units x 600mm (23,62") depth
Weight 25 kg. / 55.0 Pounds
Air flow 500 cubic meters per hour at max fan speed.
Front Panel Functions
RS232 Gain Adjustment
RESET ENABLE Switch
Mains External Enable
Vdc Derating
Fault
Rear Panel Connections
RF Out RF Monitor
External
Senses -VDC Poles 1 EXT. ENABLE
GND RS232 2 GND
RF Input 3 P.Supply Enable
+VDC Poles RS485 4 +5Vdc
+43 Volt
Impedance Selector
Mechanical specifications
1 2 3 4
Release Date 02/02/2011 File: AU301-DP_Datasheet_Rev 4 Page 3 of 10
Parameter Alarms / Status
Enable ON / STAND BY
RF Faults ACTIVE if Gain < 6dB referred to nominal
°C max ACTIVE when RF Thermal Protection is ON
Pin max ACTIVE when RF Overdrive Protection is ON
VSWR max ACTIVE if VSWR max Protection is ON
Max Current (I max) ACTIVE when Current is too high
Parameter Alarms / Status
Measurements
RF Power Input Input level expressed in [micro Watt]
RF Power Output Output level expressed in [Watt]
RF Power Driver Driver level expressed in [Watt]
RF Temperature RF Heatsink Temperature expressed in °C (half section)
RF Temperature 2 RF Heatsink Temperature expressed in °C (half section)
VDC Main Power Supply / Input Voltage
IDC Final 1 Supply Current of half section (two LDU661) expressed in Ampere
IDC Final 2 Supply Current of half section (two LDU661) expressed in Ampere
IDC Driver Supply Current of Predriver and Driver expressed in Ampere
Self Protection
Thermal Protection High Temperture protection
Overdrive Pin max must be set on the working channel with the used DVB-T signal
High Output Mismatch VSWR max must be set on the working channel with the used DVB-T signal
Max Current High Current protection
V out 43 Volt DC
I out 2 x 30 A or 1x 60 A with DVB-T signal
3 x 30 A or 1 x 90 A with Analog TV signal
Load Regulation ± 0.5% from 10% up to 100% dynamic load change
Output Ripple 400mV max
Sense External Sense for both sections (if double).
Sense Impedance 6.8 KΩ each positive/GND wire
Enable AU301-D provides a signal 0/5V (0 = disable; 5 = enable).
Open collector with internal pull-up. This signal must be used to enable the power supply.
V out 5 Volt DC
I out 0,5 A
Load Regulation ± 0.5% from 10% up to 100% dynamic load change
Output Ripple 50mV max
Enable This voltage must be present anytime to power the logic control unit.
External Service Power Supply Technical Specifications
READABLE DATA BY REMOTE COMPUTER OR CONTROL LOGIC UNIT (via RS232 / RS485)
External High Power Supply Technical Specifications
Release Date 02/02/2011 File: AU301-DP_Datasheet_Rev 4 Page 4 of 10
Plot 1. Typ S21 small signal Gain, and S11 Input Return Loss
Plot 2. Typ S21 RF Monitor vs Main Output
Graphs and Charts
Release Date 02/02/2011 File: AU301-DP_Datasheet_Rev 4 Page 5 of 10
Plot 3,4,5. Typ. Two Tone Test @ 1600 Watt PEP. 400 Watt CW each Carrier, 1 kHz spacing
Test condition: VDC=43 Volt
3rd order IMD measurements
Freq. Pout PEP 3rd order I total
[MHz] [Watt] [dBc] [A]
470 1600 -34,50 72,0
660 1600 -33,83 77,0
862 1600 -38,05 78,0
-40,00
-38,00
-36,00
-34,00
-32,00
-30,00
470 660 862
Release Date 02/02/2011 File: AU301-DP_Datasheet_Rev 4 Page 6 of 10
DVB-T Typ. Performances @ 360 Watt rms Output (without precorrection)
I Total P. coms. Eff.
@ -4,2 @ +4,2 [A] [Watt] [%]
21 474 -32,85 -33,82 51,40 2210,2 16,29
31 554 -34,53 -35,92 55,20 2373,6 15,17
41 634 -34,06 -37,55 56,50 2429,5 14,82
51 714 -36,29 -37,43 49,80 2141,4 16,81
61 794 -33,29 -34,65 46,90 2016,7 17,85
69 858 -35,92 -35,92 48,90 2102,7 17,12
CH F. [MHz]
Shoulder
-39,00
-37,00
-35,00
-33,00
-31,00
-29,00
-27,00
-25,00
21 31 41 51 61 69
Shoulder [dBc]
Channel
-4.2MHz
+4,2MHz
Release Date 02/02/2011 File: AU301-DP_Datasheet_Rev 4 Page 7 of 10
DVB-T Typ. Performances @ 430 Watt rms Output (without precorrection)
I Total P. coms. Eff.
@ -4,2 @ +4,2 [A] [Watt] [%]
21 474 -29,95 -30,58 62,20 2674,6 16,08
31 554 -33,47 -35,85 61,90 2661,7 16,16
41 634 -32,05 -33,43 59,90 2575,7 16,69
51 714 -34,32 -35,71 51,40 2210,2 19,46
61 794 -33,26 -32,72 52,70 2266,1 18,98
69 858 -33,35 -33,24 53,40 2296,2 18,73
CH F. [MHz]
Shoulder
-37,00
-35,00
-33,00
-31,00
-29,00
-27,00
-25,00
21 31 41 51 61 69
Shoulder [dBc]
Channel
-4.2MHz
+4,2MHz
Release Date 02/02/2011 File: AU301-DP_Datasheet_Rev 4 Page 8 of 10
Product Name Manufacturer's Part n. Feature Description
AU301-DP GR03490 Standard version
GR04190 AIR FILTER KIT
Integration and important Operating instructions
Ordering informations
The AU301-DP is designed for operation up to 430Wrms (DVB signal) with very high linearity, and TV
Analog Signal up to 1400 Watt peak synk, in common amplification, dual sound.
This design uses 6th generation family LDMOS devices that are capable of very high peak power as
long as the average power does not exceed specified ratings. The devices are protected by an
internal circuit, for Overdrive and high Mismatch load.
However is mandatory to handle with care the Input level during the "precorrection operations" due to
possible very fast and high spikes coming from the source.
The AU301-DP must allow the nominal voltage before applying RF driver signal or damage can result
to the amplifier. For this reason the voltage must be applied before the RF driver signal. Additionally,
the input signal, must be removed before powering down to prevent damage to the amplifier. You can
accomplish this by removing the RF driver signal and powering down the power amplifier.
The AU301-DP has not the internal Power Supply. It must be supplied by an external Power Supply
following the P.S. supply indicated on this document.
RES-Ingenium can provide two kinds of Power Supply:
- PS200 series equipped with 1 kW slots
- PS200-D3 @ 43 Volt (equipped with 3 Slots) for any Digital Operations
- PS200-D6 @ 43 Volt (equipped with 6 Slots) for any TV Analog Operations and CW
- Compact 43Volt / 4kW Power Supply (19 Inch, 2 HE) for any operation
In case of installation in a site with no air filter is strongly reccomended to buy the "Air Filter Kit
Accessory" coeded as GR04190 easy to install on the front panel.
When the AU301-DP in installed in a 19 Inch std Rack is important to leave a right space on the rear
zone to facilitate the exhausted air extraction.
It's suggested to leave one free unit (1 HE) at the top of the Amplifier.
In case of use of more AU301-DP in parallel an appropriate power combiner has to be used. The
connection between the Amplifiers and Power Combiner Input Ports is strongly reccomended to
use"low Loss Cables" type.
The Amplifier is equipped with an RF Monitor Output available by a SMA connector where is possible
to test the performances when the it's on duty. The RF Monitor Output is normally > -40 dB referred to
the main output in order to have a right signal managed by std Instrumentation.
Anyway a SMA pad can be put in series to reuduce the RF monitor amplitude.
The Amplifier is delivered in cartoon box packaging. Use all professional caution during unpacking,
handling and mounting.
Please consult RES-INGENIUM factory with any integration questions.
Release Date 02/02/2011 File: AU301-DP_Datasheet_Rev 4 Page 9 of 10
Notices and Warnings
Res-Ingenium
Via dei Vasari, 17
Zona Industriale Fontanelle di Bardano
05018 Orvieto (TR) - ITALY
Telephone: +39 0736 316333
Fax: +39 0763 316002
Internet: res-ingenium.com
E-Mail: [email protected]
V.A.T. reg.n. 01359920558
IMPORTANT NOTICE
RES-INGENIUM RESERVES THE RIGHT TO MAKE CHANGES TO THE PRODUCT(S) OR
INFORMATION CONTAINED HEREIN WITHOUT NOTICE. RES-INGENIUM ASSUMES NO
RESPONSIBILITY FOR ANY ERRORS WHICH MAY APPEAR IN THIS DOCUMENT.
WARRANTY INFORMATION APPLICABLE TO THE PRODUCT IDENTIFIED HEREIN IS
AVAILABLE UPON REQUEST. NOTHING CONTAINED HEREIN SHALL CONSTITUTE A
WARRANTY, REPRESENTATION OR GUARANTEE OF ANY KIND. RES-INGENIUM EXPRESSLY
DISCLAIMS ALL OTHER WARRANTIES, EXPRESS AND/OR IMPLIED INCLUDING BUT NOT
LIMITED TO WARRANTIES OF MERCHANTABILITY, AND OF FITNESS FOR A PARTICULAR
PURPOSE, USE OR APPLICATION.
No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of Res-Ingenium.
WARNING
RES-INGENIUM PRODUCTS ARE NOT INTENDED FOR USE IN LIFE SUPPORT APPLIANCES,
DEVICES OR SYSTEMS. USE OF A RES-INGENIUM PRODUCT IN ANY SUCH APPLICATION
WITHOUT WRITTEN CONSENT IS PROHIBITED.
Release Date 02/02/2011 File: AU301-DP_Datasheet_Rev 4

09/06/2017

Broadcast Concepts Inc

Model AMG878-600 TV Pallet Amplifier Module
Absolute Maximum Ratings
Symbol Parameter Value Unit
Vs Drain voltage supply 43 V DC
Is Supply Current 18 A dc
VSWR Load Mismatch (All phase angles, Id=12A) 10 to 1
Tc Base plate operating temperature 0 to +70C Celsius
RF IN RF Input 5 Watts
Electrical Specifications
Characteristics min typ max unit
Operating Frequency range 470 860 MHz
Power Input 3.5 5 W
Input return loss -18 -20 dB
Power Gain 18 19 dB
Collector Efficiency 35 %
Collector Current @ 500W PEP 15.5 16.5 A dc
Supply Voltage 42 V dc
Insertion Phase variation (unit to unit) +/-5.0 degrees
Power gain (unit to unit) +/-0.5 dB
Two Tone IMD; 500W pep 1MHz sp -40 dBc
F2 Second Harmonic -20dB dB
F3 Third Harmonic -35dB dB
Bias Current: Factory set to 1.3A per device.
1.0 1.3 1.5 A dc
DVB-T Power 150 W
8VSB Power 200 W
Analog Power (see note on next page) 600 W
CW Power (see note on next page) 300 W
This amplifier module is ideal for final
output stages in analog and digital TV
broadcast equipment.
• 470– 860MHz
• 42Volts
• Pout: 600W Peak Sync analog.
• 150W DVB-T/ 200W 8VSB power.
• 19dB Gain
• Thermal Tracking Bias
• NXP BLF878 Devices
• Alloy 145 copper base
• Made in the USA
Dimension (L x W x H inch) [6.2” x 3.8” x 0.75”]
Broadcast Concepts Inc
11700 NW 102 Road Suite 4 Medley FL 33178
TEL: 305-887-8400 FAX 305-887-8444
Broadcast Concepts Inc
Revised 01/12/2011
2
Notice:
This amplifier is not designed for CW signals above 300W. Many of the older transistors with low power
density can handle CW at maximum rating. A good example is the BLF861A from NXP.
The new LDMOS 42 and 50V devices are capable of very high peak power which is very important for
digital and analog TV; however, these transistors have limited CW capability.
Do not apply a CW signal to this amplifier above 300W or the amplifier may be damaged. Any attempt to
judge the performance of this product based on the application of a CW signal is invalid.
Under Analog modulation this pallet can deliver 600W peak sync. This means if you have an average
reading power meter and you apply a standard color bar modulation test pattern you can operate up to
275W. Peak Sync power may be calculated by multiplying the average power x 2.2 for a color bar test
pattern. In general when we talk about peak sync power it means that the maximum average power
allowed is 50% lower.

09/06/2017

CIRCULAR POLARIZATION ANTENNA

TECHNICAL SPECIFICATIONS
OMB EUROPA OMB AMÉRICA
C/ Paraguay 6, P.I. Centrovía 3100NW 72nd. Ave. Unit 112
OMB BROADCAST 50198 La Muela MIAMI, Florida 33122

CIRCULAR POLARIZATION ANTENNA
GP-1
The GP antenna is designed to maintain a continuous power of 1.5KW per element. This antenna is made of stainless steel, which guarantees the incorruptibility of its technical specifications and it comes adjusted to the desired frequency, although it can be changed if needed. This circular polarization antenna is highly recommended for very hard environmental conditions.
GENERAL CHARACTERISTICS FREQUENCY RANGE 87.5-108MHz
IMPEDANCE
50 Ohm MAXIMUM POWER 1.5KW
POLARIZATION
Right circular (Ev=Eh±1dB) INPUT CONNECTOR EIA 7/8”
WEIGHT
4.2Kg ASSEMBLY 1-3” tube
MATERIAL
Stainless steel TYPICAL ROE 1.10:1
AVAILABLE SYSTEMS
Some GP antennas stacked at 3/4λ distance from one another.
MODEL
Nº ANTENNAS
GAIN
INPUT CNC
MAX. POWER GP-1 1 -3dBd EIA 7/8” 1.5KW
GP-2
2
0dBd
EIA 7/8”
3KW GP-4 4 3dBd EIA 7/8” 4KW
GP-4R
4
3dBd
EIA 1+5/8”
6KW GP-6 6 4.5dBd EIA 1+5/8” 8KW
*3dB will be added to these gain values if we consider the sum of vertical and horizontal polarizations.
TECHNICAL SPECIFICATIONS
OMB EUROPA OMB AMÉRICA
C/ Paraguay 6, P.I. Centrovía 3100NW 72nd. Ave. Unit 112
OMB BROADCAST 50198 La Muela MIAMI, Florida 33122

* The images and/or technical specifications are subject to change without previous notice.

08/06/2017

Page 1 o2f0 10 8 AT&T Intellectual Property. All rights reserved.
© 2009 AT&T Intellectual Property. All rights reserved. Geographic and service restrictions apply to U-verse. Call or go to www.uverse.att.com to see if you qualify. Customizing options
require AT&T U-verse High Speed Internet Service. Wireless remote access requires WAP 2.0-compliant cell phone or other handheld device. Total Home DVR feature requires additional
U-verse receivers for each additional TV at $7 a month.
What is IPTV? IPTV, or Internet Protocol television, is a relatively new and still evolving technology that AT&T is using to deliver TV service. AT&T is the only national service provider to offer a 100-percent IP-based TV service, AT&T U-verseSM TV. IP technology means that your TV, PC, home phone and wireless devices can be integrated to all work together, giving you unmatched features, more control and more personalization.
Internet Protocol
Think of Internet Protocol as a “language” that devices use to communicate over a computer network. IP is not the same thing as the Internet. Rather, it’s the same language used by the Internet. IP technology allows information to be sent and received over any broadband or network connection.
When all of your devices and services — now including your TV
— speak the same language, they are able to easily work together in new ways. Program your DVR from your PC or wireless phone… Display personalized content and applications from the Internet on your TV…Even view your home phone’s incoming call log on your TV screen. Why IPTV is Different Than Cable Technology IPTV is a different, improved technology than “traditional” cable or satellite TV, and it allows for more flexibility within the network. IPTV enables two-way interactivity, versus a traditional, one-way cable or satellite broadcast network. The two-way IPTV network means viewers have more options to interact, personalize and control their viewing experience. IP technology also allows for more flexibility within your home network. With IP, all of the U-verse receivers in your home — no matter which room they are in — are connected on the same high-speed home network. This lets you watch shows recorded from your DVR on any TV in the house. You can also connect gaming consoles, laptops and other devices to your home network using the Ethernet port on the back of your set-top box. How IPTV is Different Than Internet Video
Watching U-verse TV is different than streaming videos over the public Internet. With U-verse TV, programming is carried over our managed network, which allows us to control video quality and the reliability of your service. Best-effort Internet video can be subject to delays due to lower bandwidth, high traffic or poor connection quality.
Because IP lets your TV communicate with other services, it can bring integrated broadband content and features to your TV screen. For example, AT&T Online Photos from Flickr gives you the ability to view personal photos that you’ve uploaded to flickr.com right on your TV. What’s Next for IPTV? Our U-verse features are only a glimpse of what is possible with IP. This new, advanced technology is still evolving, and because of our two-way IP network, we’re able to roll out enhancements quickly and easily, without any hassle for customers. That’s one of the greatest benefits of our IP platform. IP is the future for your TV, and there’s much more ahead.

08/06/2017

19-inch rack mount, 2U height
low profile design
The IC-FR5000 series uses only 2U height.
This low profile configuration allows you to
stack multiple units in an industry standard
19-inch rack and provides great space efficiency.
Two RF modules in one unit
The IC-FR5000 series has an internal
space for installing another RF unit. Two
RF modules* can be installed and can be
programmed and operated independently.
LEDs on the front panel show both channel
conditions.
* Optional UR-FR5000/UR-FR6000 required.
50W output at 50% duty cycle,
25W 100% duty cycle operation
Employing a high stability ±0.5ppm oscillator
and high performance power amplifier,
the IC-FR5000 series provides a reliable
100% duty cycle operation at 25W output.
When operated at the high power setting of
50W, the repeater operates with a 50%
duty cycle.
32 channel capacity and
5 programmable buttons
The 12-digit dot-matrix display, 5 programmable
buttons, 32 memory channels and
internal speaker allow you to use the repeater
as a simple base station or to check
repeater activity.
Multiple CTCSS, DTCS tone and
RAN code decode
The IC-FR5000 series decodes multiple
CTCSS and DTCS as well as digital RAN
(Radio Access Number) codes on a per channel
basis (up to 16 tones/codes) and downlinks
the received signal with a specified tone/
code. This function is useful for sharing a
channel with multiple groups and provides
quiet stand-by while using other groups.
D-SUB 25-pin accessory connector
The IC-FR5000 series has a programmable
D-SUB 25-pin accessory connector for
connecting various trunking controllers or
external remote control devices. Also, modulation/
demodulation signals can be input/
output from the D-SUB connector.
Two RF units can be installed inside. (Left side is an option.)
Value, Performance and
Superior receiver performance
The IC-FR5000 series has class leading
receiver performance of selectivity and intermodulation
rejection. It improves the
quality of the repeater service even under
congested band conditions.
Voice scrambler
The built-in inversion type* voice scrambler
provides secure conversation as standard.
When a more secure system is required,
the 32 code non-rolling type voice scrambler
UT-109R* and 1020 code rolling type
UT-110R* are available as an option. In
IDAS digital mode, a 15-bit encryption key
provides over 32,000 scrambling codes.
* These voice scramblers (inversion type, UT-109R
and UT-110R) are available with analog mode only.
Built-in audio compander*
The built-in audio compander improves the
signal to noise ratio and provide clear
audio. * Analog mode only.
Other features
• PTT priority setting (Local Mic., external PTT
or repeater operation)
• 5-Tone and DTMF encoder/decoder*
• CW ID transmitter
• Analog wide/narrow (12.5/25kHz) channel
spacing programmable*
• Wide frequency range: VHF 136–174MHz,
UHF: 400–470 or 450–520MHz
• Normal and priority scan
• Convenient key assign stickers supplied
• Quick and easy programming from a PC
• Beat cancel capability
• Low voltage alert*
* For analog mode only
Group A
Group B
Group C
Channel=Ch1
DTCS=023N
Repeater
Channel=Ch1
CTCSS=88.5Hz
Example shows;
3 groups are sharing
1 channel with different
tone/code settings.
Multiple-table
Channel=Ch1
CTCSS=123Hz
Flexibility: All Standard
Being digital, integration and convergence with IP technology is possible
to enhance the IDAS conventional system.
6.25kHz IDAS conventional
6.25kHz IDAS trunking
25/12.5kHz Analog
IP connection
1-1-32, Kami-minami, Hirano-ku, Osaka 547-0003, Japan Phone: +81 (06) 6793 5302 Fax: +81 (06) 6793 0013 www.icom.co.jp/world Count on us!
Printed in Japan
2380 116th Avenue NE,
Bellevue, WA 98004, U.S.A.
Phone : +1 (425) 454-8155
Fax : +1 (425) 454-1509
E-mail : [email protected]
URL : http://www.icomamerica.com
Unit 1 / 103 Garden Road,
Clayton, VIC 3168 Australia
Phone : +61 (03) 9549 7500
Fax : +61 (03) 9549 7505
E-mail : [email protected]
URL : http://www.icom.net.au
Blacksole House, Altira Park,
Herne Bay, Kent, CT6 6GZ, U.K.
Phone : +44 (01227) 741741
Fax : +44 (01227) 741742
E-mail : [email protected]
URL : http://www.icomuk.co.uk
Zac de la Plaine,
1 Rue Brindejonc des Moulinais, BP 45804,
31505 Toulouse Cedex 5, France
Phone : +33 (5) 61 36 03 03
Fax : +33 (5) 61 36 03 00
E-mail : [email protected]
URL : http://www.icom-france.com
Ctra. Rubi, No. 88 "Edificio Can Castanyer"
Bajos A 08174, Sant Cugat del Valles,
Barcelona, Spain
Phone : +34 (93) 590 26 70
Fax : +34 (93) 589 04 46
E-mail : [email protected]
URL : http://www.icomspain.com
146A Harris Road, East Tamaki,
Auckland, New Zealand
Phone : +64 (09) 274 4062
Fax : +64 (09) 274 4708
E-mail : [email protected]
URL : http://www.icom.co.nz
Glenwood Centre #150-6165 Highway 17,
Delta, B.C., V4K 5B8, Canada
Phone : +1 (604) 952-4266
Fax : +1 (604) 952-0090
E-mail : [email protected]
URL : http://www.icomcanada.com
6F No. 68, Sec. 1 Cheng-Teh Road, Your local distributor/dealer:
Taipei, Taiwan, R.O.C.
Phone : +886 (02) 2559 1899
Fax : +886 (02) 2559 1874
E-mail : [email protected]
URL : http://www.asia-icom.com
10C07, Long Silver Mansion, No.88, Yong Ding
Road, Haidian District, Beijing, 100039, China
Phone : +86 (010) 5889 5391/5392/5393
Fax : +86 (010) 5889 5395
E-mail : [email protected]
URL : http://www.bjicom.com
81-850 Sopot, ul. 3 Maja 54, Poland
Phone : +48 (58) 550 7135
Fax : +48 (58) 551 0484
E-mail : [email protected]
URL : http://www.icompolska.com.pl
Communication Equipment
Auf der Krautweide 24
65812 Bad Soden am Taunus, Germany
Phone : +49 (6196) 76685-0
Fax : +49 (6196) 76685-50
E-mail : [email protected]
URL : http://www.icomeurope.com
VHF AND UHF REPEATERS
08YD008B* © 2008–2009 Icom Inc.
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries. IDAS, IDAS logo are trademarks of Icom Incorporated.
AMBE+2 is a trademark and property of Digital Voice Systems Inc. All other trademarks are the properties of their respective holders.
OPTIONS
• HM-152 HAND MICROPHONE
Regular hand microphone.
• SM-25 DESKTOP MICROPHONE
Equipped with a monitor switch.
• SP-22 EXTERNAL SPEAKER
Compact and easy-to-install.
• UT-109R VOICE SCRAMBLER UNIT*
Provides operating security. Up to 32
non-rolling scrambling codes are
available. (Analog mode only)
• UT-110R VOICE SCRAMBLER UNIT*
Up to 1020 rolling scrambling codes
are available. (Analog mode only)
* UT-109R/UT-110R voice scramblers are not
compatible with Inversion type voice scrambler.
• UR-FR5000 VHF CHANNEL MODULE
136–174MHz, 50W
• UR-FR6000 UHF CHANNEL MODULE
400–470MHz, 450–520MHz, 50W
• UC-FR5000 IDAS TRUNKING/NETWORK
CONTROLLER BOARD
Provides IDAS digital trunking and
IDAS conventional IP network functions.
Please see the IDAS brochure for details.
HM-152 SM-25 SP-22 UT-109R UT-110R UR-FR5000
UR-FR6000
UC-FR5000
TX Antenna
Connector
RX Antenna
Connector
Installation space for optional
channel module.
D-SUB 25-Pin
Accessory
Connector
External
Speaker
Connector
To DC Power
Receptacle
Installation space for optional
UC-FR5000.
REAR VIEW
SPECIFICATIONS
• Frequency coverage :
IC-FR5000 136–174MHz,
IC-FR6000 400–470, 450–512, 450–520
350–400* MHz (* Non-FCC)
• Number of channels : Max. 32 channels
• Channel spacing : 6.25/12.5/25kHz
7.5/15.0/30kHz
• Type of emission Wide : 16K0F3E,
Narrow 11K0F3E/F7E/F7D/F7W,
8K50F3E* (* VHF EXP version only),
Digital 4K00F1E/F1D/F3E
• Frequency stability : ±0.5ppm
• Antenna impedance : 50Ω (Type-N × 2)
• Operating temperature : –30°C to +60°C
range ; –22°F to +140°F
• Power supply voltage : 13.6V DC
• Current drain (at 13.6V DC) :
TX 50W 15A
RX Max. audio 1.9A
Stand-by 500mA
400mA (FAN, LCD backlight off)
• Dimensions (W×H×D) : 483×88×260 mm
; 191⁄32×315⁄32×101⁄4 in
• Weight : 5.6kg ; 12.3lb (approx.)
• Output power : 50W (adjustable to 5W)
25W at 100% duty cycle
• Max. frequency deviation : ±5.0/2.5kHz (wide/narrow)
• Spurious emissions : 80dB typ.
• Adjacent channel power : 73/67dB typ. (wide/narrow)
• FM hum and noise : 50/45dB typ. (wide/narrow)
• Audio harmonic distortion : 1% typ. (40% deviation)
• Microphone impedance : 600Ω (8-pin modular)
• Sensitivity FM (W/N) : 0.30μV typ. (at 12dB SINAD)
Digital 0.25μV typ. (at 5% BER)
• Spurious response : 90dB typ.
• Intermodulation rejection : 78dB typ.
• Hum and noise ratio : 50/45dB typ. (wide/narrow)
• Audio output power : 4.0W typ. at 5% distortion with
a 4Ω load
• External speaker connector : 2-conductor 3.5 (d) mm
(1⁄8″)/4Ω
GENERAL
Measurements made in accordance with TIA-603 (for Analog
FM). All stated specifications are subject to change without
notice or obligation.
TRANSMITTER
RECEIVER
Standard MIL 810 F
Method Procedure
High Temperature 501.4 I, II
Low Temperature 502.4 I, II
Dust 510.4 I
Vibration 514.5 I
Shock 516.5 I
Also meets equivalent MIL-STD-810-C, -D and -E.
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the
following MIL-STD requirements and strict environmental standards.
Supplied Accessories
• DC power cable • Handle kits
• Key assign stickers
Offers an integrated system
IC-F5061D series IC-F3161D series
Take advantage of Icom’s integrated system design for
a total digital system. The IC-F3161D and IC-F5061D
series are designed for the IDAS compatible terminal
components with the following digital features.
• IDAS conventional • IDAS trunking
• Selective call, group call and talk group ID
• Status call/request • Radio check
• Radio stun/kill/revive • Data call
• Digital voice scrambler
• Emergency call
• Call alert • Call log