TuffMutt 3D Printing & Design

  • Home
  • TuffMutt 3D Printing & Design

TuffMutt 3D Printing & Design !!! TUFFMUTT MERCH COMING SOON !!! — ; Just a Mutt who made 3D Printing Mobile out of a trailer 🇨🇦

This may seem a tad bit extreme for just a screwdriver BUT I promise you, you’ll never use a ratcheting multi-bit screwd...
15/09/2023

This may seem a tad bit extreme for just a screwdriver BUT I promise you, you’ll never use a ratcheting multi-bit screwdriver that feels, works, or ratchets quite like a LTT driver. Check them out on Linus Tech Tips page.

- custom colour choice
- additional bits to suit your specific tasks
- full-size (pictured below) and recently released STUBBY version
- bit storage inside the bottom of the handle
- knurled grip
- guaranteed lighter than any other ratcheting multi-bit on the market (my opinion)
- super fast shipping (6 days exactly to Alberta, Canada)

Simply put it’s F***ing awesome.

Shipment from came in for the Enclosed P1P build, print room is 90% complete (for now) and finally as I mentioned in my...
02/09/2023

Shipment from came in for the Enclosed P1P build, print room is 90% complete (for now) and finally as I mentioned in my last post I have rigged up a temporary filming station using my movie grade IPhone 14(jokes) with an tripod/extension/phone mount combination 👌🏼 luckily I have been looking into a few possible cameras if I decide that these videos and clips are something I can do consistently.

Let’s start over… Kicking off with a proper logo, more content, more information for beginners and finally some videos/ ...
29/08/2023

Let’s start over… Kicking off with a proper logo, more content, more information for beginners and finally some videos/ clips on how it all happens from start to finish! I will be posting twice a week or more and once I finish setting up my video recording set up I will also be posting 1 clip a week. *** SOON TO BE ADDING A LASER ENGRAVER/ CUTTER TO THE MIX ***

Some of my personalized “ Custom Coasters “ printed with my very first printer… These were also my first functional prin...
27/08/2023

Some of my personalized “ Custom Coasters “ printed with my very first printer… These were also my first functional print when I got into 3D Printing; even with some top and bottom layer flaws they came out good. Simple, functional and take up little to no space with their stackable design.

Creality CR-10 Smart Pro w/ Sonic Pad (Klipper)
Filament: Charcoal Black (unsure of brand)
Nozzle temp: 200°c Bed temp: 55°c
Print Speed: 80mm/s

!!!NAME CHANGE, NEW FILAMENTS, MORE COLOURS AND MORE 3D PRINTING !!!***Once Facebook decides if my actual account name i...
27/08/2023

!!!NAME CHANGE, NEW FILAMENTS, MORE COLOURS AND MORE 3D PRINTING !!!

***Once Facebook decides if my actual account name is “up to Facebook code” you will now see my 3D Printing page as shown below***

Here’s some at its finest, I am constantly blown away at the capability of these machines combined with crazy speeds a...
10/08/2023

Here’s some at its finest, I am constantly blown away at the capability of these machines combined with crazy speeds and incredible print quality. Pictured here are 1 of 4 parts printed for the “STASH PAWN” I made last month for a friend at work. Printed w/ BAMBU LABS P1P using a personalized config. Consisting of (auto) Tree supports, Layer height 0.2 average Print speed - 300mm/s, using BBL- White PLA basic filament.

16/07/2023

Oh, hello everyone 👋🏼 it’s been a minute or so… my apologies. Here’s some recent prints I have done and a Timelapse that unfortunately is not as crazy as I thought it would be but it’s 3.5 hours of filming turned into 0:35 seconds of a Honeycomb wall organizer project that I am still currently printing panels and parts for ! Hope everyone has been well, Enjoy!

Printed on my newest addition to the Travel Trailer mobile print farm haha

BambuLabs P1P w/ AMS
Filament: Geetech PETG Silver
Printed at 350mm/s average print speed
Layer height: 0.16

I will post photos of the other designs and prints throughout the rest of the weekend, thank you !

I’ve been very behind on my posting with this new page due to work and the complications that come with trying to make a...
19/02/2023

I’ve been very behind on my posting with this new page due to work and the complications that come with trying to make a complete 3D printing system portable (it’s not very portable) I apologize to anyone who is new and trying to support me. I will do the best that I can over the coming months with big changes to come, thank you all for your support!

NEW POST! Decided to test out two of my printers abilities over this past month with some fun little side projects such as these two fully articulating pieces (Shark by McGybeer and Axolotl by AKinferno both from Printables.com)

First figure model print aswell for a friend at work’s son who loves Spider-Man which turned out 10/10 unfortunately I’m not capable of multicolour prints yet but the big surprise is yet to come and most definitely will include multi colour printing finally ! (Spider-Man Bust Model thanks to Octagonman on Thingiverse.com)

Newest functional design printed in PLA+ material. Screwdriver organizer with slots for bits showing their sizes with th...
22/01/2023

Newest functional design printed in PLA+ material. Screwdriver organizer with slots for bits showing their sizes with the window below.


Printer: Creality CR-10 Smart Pro W/ PEI magnetic buildplate

Filament: Standard PLA 1.75mm Jetblack

TEMP: Nozzle-215°C
Bed-70°C @ 50mm/s initial speed

20/01/2023

1.5 hours into 33 seconds. Here is a Timelapse with the mini making some more parts for my projects out of PLA+

Printer: Creality Ender 2 Pro (The Mini)

Filament: Silk Red PLA +

TEMP: Nozzle-215°C-210°C
Bed-70°C-65°C @ 40-60mm/s

18/01/2023

Initial layer for some custom corners I’m making to hold my new (SM) Acrylic/ Plexiglass printer enclosure box panels tightly together while also adding some extra rigidity to the whole structure.

Printer: Creality CR-10 Smart Pro W/ PEI magnetic buildplate and Creality (L) Enlosure

Filament: Duramic PLA+ 1.75mm Jetblack

TEMP: Nozzle-215°C
Bed-70°C @ 50mm/s initial speed

Address

AB

Telephone

+14035050893

Website

Alerts

Be the first to know and let us send you an email when TuffMutt 3D Printing & Design posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to TuffMutt 3D Printing & Design:

Videos

Oh, hello everyone 👋🏼 it’s been a minute or so… my apologies. Here’s some recent prints I have done and a Timelapse that unfortunately is not as crazy as I thought it would be but it’s 3.5 hours of filming turned into 0:35 seconds of a Honeycomb wall organizer project that I am still currently printing panels and parts for ! Hope everyone has been well, Enjoy! Printed on my newest addition to the Travel Trailer mobile print farm haha BambuLabs P1P w/ AMS Filament: Geetech PETG Silver Printed at 350mm/s average print speed Layer height: 0.16 I will post photos of the other designs and prints throughout the rest of the weekend, thank you !

1.5 hours into 33 seconds. Here is a Timelapse with the mini making some more parts for my projects out of PLA+ Printer: Creality Ender 2 Pro (The Mini) Filament: Silk Red PLA + TEMP: Nozzle-215°C-210°C Bed-70°C-65°C @ 40-60mm/s

Initial layer #timelapse for some custom corners I’m making to hold my new (SM) Acrylic/ Plexiglass printer enclosure box panels tightly together while also adding some extra rigidity to the whole structure. #3dprinting #3ddesign Printer: Creality CR-10 Smart Pro W/ PEI magnetic buildplate and Creality (L) Enlosure Filament: Duramic PLA+ 1.75mm Jetblack TEMP: Nozzle-215°C Bed-70°C @ 50mm/s initial speed

Shortcuts

  • Address
  • Telephone
  • Alerts
  • Contact The Business
  • Videos
  • Claim ownership or report listing

  • Want your business to be the top-listed Media Company?

Share