Offset Printing Solution

Offset Printing Solution Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Offset Printing Solution, Dhaka.

আসসালামু আলাইকুম, পবিত্র রমজানের পর ঈদ-উল ফিতরের আনন্দ সবার জীবনে বয়ে আনুক অনাবিল শান্তি ও সমৃদ্ধি। পরিবারের সবাইকে নিয়ে...
22/04/2023

আসসালামু আলাইকুম,
পবিত্র রমজানের পর ঈদ-উল ফিতরের আনন্দ সবার জীবনে বয়ে আনুক অনাবিল শান্তি ও সমৃদ্ধি। পরিবারের সবাইকে নিয়ে ভাল থাকুন, সুস্থ থাকুন ও নিরাপদে থাকুন এই প্রত্যাশায় সবাইকে জানাই ঈদ-উল-ফিতরের প্রাণঢালা শুভেচ্ছা। ঈদ মোবারক।
শুভেচ্ছান্তে,
এ.এম.অহিদুল ইসলাম
ডিজিটেক মেশিনারী‌ লি:

19/02/2021

we need urgently graphic designer 2 persons

19/10/2019

if you need this one please contact +8801919364102

GravureAlso known as rotogravure, this is a technique in which an image is engraved into a printing cylinder. That cylin...
11/03/2019

Gravure

Also known as rotogravure, this is a technique in which an image is engraved into a printing cylinder. That cylinder is inked and this ink subsequently transfers to the paper. Gravure is used for high volume work such as newspapers, magazines, and packaging.

Using rotogravure to print promotion, packaging, publications and on productsGravure is gradually losing market share to offset for publication printing and to flexo for packaging applications.

Digital printingDigital printing can be done in various ways. Two technologies dominate the industry:Inkjet – In an inkj...
11/03/2019

Digital printing
Digital printing can be done in various ways. Two technologies dominate the industry:

Inkjet – In an inkjet printer the image that needs to be printed is created by small droplets of ink that are propelled from the nozzles of one or more print heads. Inkjet devices can print on a wide range of substrates such as paper, plastic, canvas or even doors and floor tiles. Inkjet printing is used a lot for posters and signage. It is also economical for short run publications such as photo books or small runs of books. In-line inkjet printers are sometimes combined with other types of presses to print variable data, such as the mailing addresses on direct mail pieces. The press shown below is the HP PageWide C500, meant for printing on corrugated board.
HP PageWide C500 Press
Xerography – In xerographic printers, such as laser printers, the image that needs to be printed is formed by selectively applying a charge to a metal cylinder called a drum. The electrical charge is used to attract toner particles. These particles are transferred to the media that is being printed on. To make sure the toner is fixed properly, the substrate passes through a fuser that melts the toner into the medium. Laser printers are not only used in offices but also for small run printing of books, brochures and other types of document. These printers are also used for transactional printing (bills, bank documents, etc) and direct mail.
In 2009 both techniques jointly accounted for around 15% of the total volume of print.

Using digital printing for promotion, packaging, publications and productsDigital printing is increasingly utilized for print jobs that were previously printing using offset, flexo or screen printing.

In short run small format (A3 size) printing, digital is taking over from offset for both color and B&W printing. Quick printers and copy shops print digitally on presses from vendors like Xerox, HP, Canon, and Konica Minolta.
Labels are also increasingly being printed digitally.
Billboard and point-of-sale or point-of-purchase jobs are being done by wide-format inkjet devices.
There is a wide range of small format printers used to print on phone cases, mugs and other products.
In book printing publishing companies start to rely more on print-on-demand. The Espresso Book Machine pictured below is well suited for that job.

Printing processesThere are a wide variety of technologies that are used to print stuff. The main industrial printing pr...
11/03/2019

Printing processes

There are a wide variety of technologies that are used to print stuff. The main industrial printing processes are:

Offset lithography
Flexography
Digital printing: inkjet & xerography
Gravure
Screen printing
Additional printing techniques were developed for very specific applications. These include flock printing, letterpress, intaglio, pad printing, and thermography.

Why a certain job is better printed using one of these processes mentioned can be read on this page about choosing a printing process.

Offset
In offset lithography a printing plate, which is most often made from aluminum, contains an image of the content that needs to be printed. When the plate is inked, only this image part holds ink. That inked image is subsequently transferred (or offset) from the plate to a rubber blanket and then to the printing surface. The process can be used to print on paper, cardboard, plastic or other materials, but these have to have a flat surface.

Below is a picture of a 4 color sheetfed printing press. At the far end is the intake where individual sheets of paper are automatically fed into the press. The 4 towers or printing units each print one color, typically black get printed first, followed by cyan, magenta and yellow. The stack of printed sheets is visible on the front of the machine, underneath the press console & monitor which the press operator uses to control the press.

For higher volume work offset presses use rolls of paper. The picture below shows such a much larger web press. It is so fast that the printed paper needs to be force dried. The black unit at the end of the press is an oven.

Offset is nowadays the most widely used printing technique for an extensive range of products such as books, newspapers, stationery, corrugated board, posters, etc.

Using offset to print promotion, packaging, publications and on productsThere is a trend that printing promotional material is gradually migrating to digital printing while some packaging printing is moving to flexo.

Heidelberg Mo Used Machine
11/03/2019

Heidelberg Mo Used Machine

HEIDELBERG KORD -64 used Machine
11/03/2019

HEIDELBERG KORD -64 used Machine

11/03/2019

Why will you like our page ???
# . You will get offset related job circular here .
# . You will get information about offset printing

11/03/2019

Well Come
From
Offset Printing Solution 😍😍😍

CtP Machine
09/03/2019

CtP Machine

Manual Die - Cutting Machine
09/03/2019

Manual Die - Cutting Machine

Some Different Type Die -Cutting Machine
09/03/2019

Some Different Type Die -Cutting Machine

Paper Cutting Machine
09/03/2019

Paper Cutting Machine

Lithography Invented by Bavarian author Aloys Senefelder in 1796,[63] lithography is a method for printing on a smooth s...
09/03/2019

Lithography

Invented by Bavarian author Aloys Senefelder in 1796,[63] lithography is a method for printing on a smooth surface. Lithography is a printing process that uses chemical processes to create an image. For instance, the positive part of an image would be a hydrophobic chemical, while the negative image would be water. Thus, when the plate is introduced to a compatible ink and water mixture, the ink will adhere to the positive image and the water will clean the negative image. This allows for a relatively flat print plate which allows for much longer runs than the older physical methods of imaging (e.g., embossing or engraving). High-volume lithography is used today to produce posters, maps, books, newspapers, and packaging — just about any smooth, mass-produced item with print and graphics on it. Most books, indeed all types of high-volume text, are now printed using offset lithography.

In offset lithography, which depends on photographic processes, flexible aluminum, polyester, mylar or paper printing plates are used in place of stone tablets. Modern printing plates have a brushed or roughened texture and are covered with a photosensitive emulsion. A photographic negative of the desired image is placed in contact with the emulsion and the plate is exposed to ultraviolet light. After development, the emulsion shows a reverse of the negative image, which is thus a duplicate of the original (positive) image. The image on the plate emulsion can also be created through direct laser imaging in a CTP (Computer-To-Plate) device called a platesetter. The positive image is the emulsion that remains after imaging. For many years, chemicals have been used to remove the non-image emulsion, but now plates are available that do not require chemical processing.

History of printing
09/03/2019

History of printing

Negative lithographic printing plate
09/03/2019

Negative lithographic printing plate

Side view of the offset printing process. Multiple ink rollers are used to distribute and homogenize the ink
09/03/2019

Side view of the offset printing process. Multiple ink rollers are used to distribute and homogenize the ink

Address

Dhaka
1000

Telephone

01919364102

Website

Alerts

Be the first to know and let us send you an email when Offset Printing Solution posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Videos

Both Side Tape Applicator Machine
Both Side Tape Applicator Machine

if you need this one please contact +8801919364102

Shortcuts

Share