Misfits Racing

31/12/2023

Started the year in mockup, finished the year in mockup but more closer to finish

05/11/2023

Things weren’t meant to get this serious so fast, this stage of the Cefiro was only meant to be a basic +T setup on a stock bottom end

01/11/2023

After messing up the first time around on the prototype bumper, the second time worked better

04/10/2023

Work started on the rear guard flares, still a lot of work to be done

19/09/2023

Got the Cefiro look mostly done. Got the front guards back recently with the flares mostly finished, based the vent off one of there's, just squared it up more. Sent the front bumper out recently to start getting finalised.

02/07/2023

Final bits came in for the 30ET core, thanks , went with some oversized valves only aftermarket option I could find online. Also got some goodies, the gold valve cover dress up kit will go well with the final colour scheme. Still a lot more to get

25/06/2023

The Cefiro 30ET setup looking tough. Forgot I had to redo the hot side intercooler piping and check bumper mockup clearance for intercooler piping

10/06/2023

Been a minute since posting, haven't been doing much, getting the front bumper closer now, then sending to get a mould taken and the final finished product done. Should have more updates soon

09/05/2023

Since I dislike all the available aftermarket options, I started to create my own, still a lot of work to do on the design but slowly coming together. 3KG of clay so far

07/05/2023

When I changed the turbo setup, there was going be no messing around with cheap Chinese wastegates, so went with one of the best on the market . Why risk destroying an engine on a cheap product.

26/04/2023

All the goods. Just got get the valves from Aus now and the head package will be complete

16/04/2023

Started to try to tidy up the boot area, typical 30+ year old Nissan problems has rust everywhere. Sandpaper and rust treatment didn't work, so the wire wheel is next

**tbox

13/03/2023

Finally got all the core engine parts, can start stripping it soon. Still, a lot to get. Having around is a big help for parts.

05/03/2023

So decided the 30 needed a little head work as most likely it going be limit bashing a few time, will be doing a bigger cam, new valves and new retainers

10/02/2023

Slowly coming together now, just got to get the head gasket now. Thanks, Thrash Garage] and for having 30ET parts stock. Bonus point to Thrash Garage] as they sent me a treat 😂

06/01/2023

Cefiro's new intake came in. Still a bit of work to be done to the engine.

31/12/2022

A few months into the year I u-turned on the plan put the Cefiro back to a stock level and choose to do my future plans. There were a few bad decisions made during the year halting progress. Before the year ended out I order a present for it, ready to begin next year to make it happen. Mock-up has turned out great now to order stuff.

02/12/2022

Still a lot of decisions to be made, could this become one of NZ's most unique and wildest looking Cefiro's

25/06/2022

https://www.instagram.com/reel/CfNpGSSpxCC/?igshid=YmMyMTA2M2Y=

Xavier Wulf • Akina Speed Star

06/02/2022

More progress on the Vl, the mockup is nearly done, got put the suspension back to check if everything is correct and in the right position

31/10/2021

Mockup chassis rails started

25/10/2021

Bye-bye floor. So much room for activities now

05/06/2021

Ep-4 out now Holden/Nissan Commodore Vl Hybrid S-Chassis EP-4 https://youtu.be/kljoCnfMW9w

29/05/2021

https://youtu.be/4hAdEEE1T3k EP-3 Up

First fitting of the V6 and on the ground with the Nissan suspension in the front. Still had the live axle in the rear at this point

21/05/2021

https://youtu.be/Z1h9ouciAP8 Second video out now

Couple weeks after get the Vl, started make changes to it, borrowing parts from my other projects and use left over parts from donor cars

14/05/2021

https://youtu.be/Ak9L18Q2KSs first video up on the Vl

23/03/2021

End up getting some S13 Coilovers for cheap, to use for mock. Coilovers from a S13 fit without issues

19/03/2021

Did some more test fitting and made more prototype parts. Go have get a bandsaw or something similar to cut more cleaner

18/03/2021

Made some prototype steering rack mounts. Used a Nissan subframe as a template

16/03/2021

Started to clean up the tub cut lines. Ready for the next stage