Zeta One Creations

  • Home
  • Zeta One Creations

Zeta One Creations Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Zeta One Creations, Digital creator, .

The current insanity of one of my long-term projects, turning the Pillar of Autum into a Macross. This thing is going to...
04/06/2024

The current insanity of one of my long-term projects, turning the Pillar of Autum into a Macross. This thing is going to take a long time, and I still need to work on my diagrams and plans, but I think this is a good rough start (at least gets me an idea)

03/06/2024

Well, now that Fan Fusion is well over a week past, I think it's time to start planning out my next Costumes. With TCC coming up (and a possible trip to HSC finals) I need to really figure out my plans.

In-Progress:
Halo MJONLIR MK V [b] - repairs/updates/undersuit
Helldivers 2 B-01 Tactical- Redesign/repairs/rigging
Halo Jorge-052 (Noble 5) Beginning construction

On-Deck:
Halo Infinite Master Chief John-117 Game Accurate - Files Gathered
Kamen Rider 01 Realizing Hopper - Files Gathered
Kamen Rider W Cyclone Joker - Files Gathered
Destiny 2 Warlock

Planning/conception:
SDF-07 Pillar of Autumn Battaloid Mode (Macross/Robotech & Halo crossover)

My Halo costumes over the years from 2011 to today.I recently looked back and was blown away by how my quality of work h...
30/05/2024

My Halo costumes over the years from 2011 to today.
I recently looked back and was blown away by how my quality of work has improved. From my first costume to my latest, each one was leaps and bound better than the last, and I'm already at work on my next project.

Here is to another 13 years of Halo costumes and even more cospaly as I expand my abilities and what I make!

Already back to work on my next project. Jorge-052 from Halo: Reach... I just can't escape Spartan builds. We'll at leas...
29/05/2024

Already back to work on my next project. Jorge-052 from Halo: Reach... I just can't escape Spartan builds. We'll at least the foam work will let me also finish my Helldiver.

And that's a wrap for It was such an amazing year, and I am so excited for next. But for now, it's time to go home, re...
27/05/2024

And that's a wrap for
It was such an amazing year, and I am so excited for next. But for now, it's time to go home, rest up, then plan for my next con and projects (plus repair my Helldiver)

SPARTAN Z-01 dropping into the last day of Con. It has been an absolute blast talking with everyone and taking photos. U...
26/05/2024

SPARTAN Z-01 dropping into the last day of Con. It has been an absolute blast talking with everyone and taking photos. Until the next deployment.

It's been a long time since I did anything with fabric... but this is coming out surprisingly well. This is going to be...
13/05/2024

It's been a long time since I did anything with fabric... but this is coming out surprisingly well. This is going to be a Helldivers jacket at some point.

.

"Helldivers to Hellpods, repeat Helldivers to Hellpods"Major assembly and construction complete. Now for priming, sandin...
27/04/2024

"Helldivers to Hellpods, repeat Helldivers to Hellpods"

Major assembly and construction complete. Now for priming, sanding, and repeating until smooth. Also, I need to start on my jacket, but that can wait until I'm not preparing for work... panic!!!

Progress on my armor plinth. There is still a bit of work to make it look halo before electronics. But now I can start o...
23/04/2024

Progress on my armor plinth. There is still a bit of work to make it look halo before electronics. But now I can start on the armor frame and support structure. (The plinth will not be holding any of the weight)

Here we go
21/04/2024

Here we go

Progress on an ODST gauntlet for a commission. So far, so good, even though I've been out of foam work for a short time....
18/04/2024

Progress on an ODST gauntlet for a commission. So far, so good, even though I've been out of foam work for a short time. Getting a lot of nice details and pieces... not to finish it and make the other.

So close to having a fully printed Helldiver. Just thee more pieces for my torso (two prints), then foam work and sewing...
18/04/2024

So close to having a fully printed Helldiver. Just thee more pieces for my torso (two prints), then foam work and sewing... so much to do.

Progress on my armor plinth for the Fireteam Phoenix booth at Fan Fusion. This is just the back half of the platform, bu...
15/04/2024

Progress on my armor plinth for the Fireteam Phoenix booth at Fan Fusion. This is just the back half of the platform, but so far, so good. I still have a ton of work, including painting and electronics, but I am so excited to get this done.

Progress of my Helldiver torso and thighs... so close to being done!
13/04/2024

Progress of my Helldiver torso and thighs... so close to being done!

Finally finished printing my Helldiver helmet. Took a long time to sort out all the issues, but I am so happy that after...
07/04/2024

Finally finished printing my Helldiver helmet. Took a long time to sort out all the issues, but I am so happy that after switching slicers, I was able to dial everything in.

Still have some resin bits to print, but I'll worry about that later. Still have tons of work for Fan Fusion.

~Model from Galactic Armory

That euphoric moment when after 3 weeks of fighting (thank you pc reset/slicer change) you finaly dial in your printers ...
03/04/2024

That euphoric moment when after 3 weeks of fighting (thank you pc reset/slicer change) you finaly dial in your printers settings.
This Lethal Company helmet is well over due, but will soon be going to its proper home... and I can finally get my Helldiver printed.

Address


Website

Alerts

Be the first to know and let us send you an email when Zeta One Creations posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

  • Address
  • Alerts
  • Claim ownership or report listing

  • Want your business to be the top-listed Media Company?

Share