fiN Studios

04/05/2023

Normally, we are building modules in the 3U format… well, we changed it up with this months latest build… The 1U Stereo Output Mixer by . Small in size, this mixer module gets the job done and doesn’t take no for an answer.

Check out our latest time lapse build, review, gallery, and more over at the main site - finsudios.com. Build video features some badass new music from .music


https://finstudios.com/synthrotek-1u-stereo-output-mixer-diy-build

22/03/2023

This months modular build comes from CircuitBenders UK. drumBs is a eurorack or stand alone module that we happened to come across while surfing ETSY. drumBs is a tweaked version of the Syntom II, an analogue percussion project first published nearly four decades ago in the April 1983 edition of the mighty Electronics & Music Maker Magazine.

Check out our latest time lapse build, review, gallery, and more over at the main site - finsudios.com. Build video features some badass new music from .


https://finstudios.com/circuit-benders-uk-drumbs-diy-build/

11/03/2023

Our first modular album was just released on all streaming platforms and is now available on Bandcamp… link is below.

https://blackdreamsyndrome.bandcamp.com/album/pandemic

09/03/2023

The gang over at have done it again with another crossfader module, only this time it can work with video as well. This module is known as the XFD and don’t let its small size give you the wrong idea… it can play a BIG part in your performance or recordings.

Check out our latest time lapse build, review, gallery, and more over at the main site - finsudios.com. Build video features new music from maKo ().


https://finstudios.com/synthrotek-xfd-diy-build/

16/02/2023

As with any module that Reverse Landfill releases, we have to pick it up and put it on the workbench. The Noise (v8) is no different. It is a brutal, gritty and chaotic module that can bring the next level to your drums or inputs.

Check out our latest build which features music by .music .bandcamp and if you want to learn more about the build, head on over to the main site for more info.




https://finstudios.com/reverse-landfill-noise-v8-diy-build/

14/02/2023

New release 2-13-23

https://music.apple.com/us/album/the-path-that-lies-before-us-ep/1669664633

03/02/2023

Neutral Labs PIP is two morph-able CV generators/complex LFOs in 8 HP that can be synced to each other in predefined ratios, unsynced or phase-shifted between each other. The module also allows you to record, morph and time-stretch your own external CV or k**b movements.

Check out our latest time lapse build video and if you would like to learn more about the NL PIP DIY module, head on over to https://finstudios.com for more details. Link is below and in Bio. Build video features music by our friend


https://finstudios.com/neutral-labs-pip-diy-build

02/02/2023

When it comes to distortion, Neutral Labs understands it, and harnesses it. They have done that again with their new module, NIJEL which uses the “nut” cards or other components to change the sound of the waveforms ran through the module.

Check out our latest time lapse build video and if you would like to learn more about the NL NIJEL DIY module, head on over to https://finstudios.com for more details. Link is below and in Bio. Build video features dark beats by our friend

.nyppy
https://finstudios.com/neutral-labs-nijel-diy-build

18/01/2023

Here are the final 2 of the 4 modules we built by for this months DIY builds.

Check out our latest time lapse build video and if you would like to learn more about these DIY modules, head on over to https://finstudios.com for more details. Link is below and in Bio. Build video features music by our friend


https://finstudios.com/cereal-instruments-binary-and-resolution-diy-builds-copy/

18/01/2023

We decided to do a few things a little different this month by not only having more than 1 build/review, but having 2 by one company… . Their utility modules are something that every rack should have in them. We use them all of the time not only for performance but for recording or just jamming.

Check out our latest time lapse build video and if you would like to learn more about these DIY modules, head on over to https://finstudios.com for more details. Link is below and in Bio. Build video features music by our friend


https://finstudios.com/cereal-instruments-swerve-and-raze-diy-builds/

10/12/2022

The .club Itora is a cascading LFO module with four independent unsynced LFO speeds that are all controlled with one k**b. This can be crucial during performances or if you are just looking to add some flare to your next gig. Each LFO has a square and triangle wave output and the module features a cv input (with attenuator) for the speed parameters.

Check out our latest time lapse build video and if you would like to learn more about the FRUKU Itora DIY module, head on over to https://finstudios.com for more details. Link is below and in Bio. Build video features some new badass music by our friend !


https://finstudios.com/fruku-itora-diy-build

10/12/2022

.club has some pretty badass modules and one of his latest, Glue is a 4hp compressor module with a lot of grit. Glue is a compressor that has a high pass filter to help clean up any sound tossed through it and the high pass filter is fixed at 20 hrtz.

Check out our latest time lapse build video and if you would like to learn more about the FRUKU Glue DIY module, head on over to https://finstudios.com for more details. Link is below and in Bio. Build video features new music by


https://finstudios.com/fruku-glue-diy-build

01/12/2022

22/11/2022

One of our favorite manufacturers, FRUKU is at it again with the release of his Evi module. In only 2HP, the FRUKU Evi is an envelope follower and signal inverter, meaning that you can plug any audio signal into the module and you will output an inverted envelope.

Check out our latest time lapse build video and if you would like to learn more about the FRUKU Evi DIY module, head on over to https://finstudios.com for more details. Link is below and in Bio. Build video features music by !


https://finstudios.com/fruku-evi-diy-build

16/11/2022

We all know that you can’t have enough VCA’s in a modular system. The gang over at Synthrotek recently released a new VCA module in their slider series and we had to pick one up for our latest build. This build isn’t your normal hole-through due to its SMD parts which is perfect for more advanced builders.

If you would like to learn more about the VCA module, head on over to https://finstudios.com for more details and time lapse build video. Link is below and in our Bio. Build video features new music from the one and only !


https://finstudios.com/synthrotek-vca-diy-build

15/11/2022

The FRUKU Oktra has four independent outputs which can be controlled simultaneously with one k**b…. the macro k**b! This module is great for performance settings and it can also be used as an attenuverter/multiple if you patch the EXT IN.

Check out our latest time lapse build video and if you would like to learn more about the FRUKU Oktra DIY module, head on over to https://finstudios.com for more details. Link is below and in Bio. Build video features new music from




https://finstudios.com/fruku-oktra-diy-build

13/11/2022

Audio Waffle is coming later this month… November 20th starting at noon. 10$ cover and some badass waffles and tunes for ya.

29/10/2022

With October coming to a close, we decided to take on one more build for the month. This time we took on the Polivoks Envelope Generator kit by .

Check out our latest build, gallery and review of this rack staple module. Build video features new music from our friend ! Link is below and in our bio.

build
https://finstudios.com/erica-synths-polivoks-envelope-generator-diy-build