20/09/2023
How to make liquid soap
Caustic soda ( 2 table spoon only so that it will not peel off your hand)
Nitrosol
Soda ash
STPP
Laurel rice
Texapon
Sulphonic acid
Formalin ( 3 tablespoons only)
Foam blaster
Colour
Perfume
Procedure
I will give you method of 30 litres of liquid soap incase you want to sell it.
When you go to chemical shop you tell them to give measurement of. 30litres.
METHOD.
1) Mix caustic soda in 1 litre of water and stir it very well and set aside.
2) Mix soda ash in another bucket of water ( 3 litres) and stir very well to avoid lumps.
3) Mix STPP in another bucket of water ( 3 litres) and stir
4) Mix Laurel rice (SLS ) in another 3 litres of water and stir.
5) Mix Texapon and Sulphonic acid in another bucket until they are well dissolve. ( Please don't add water to this 2 Chemical please)
Leave all the mixture for 20 to 30 minutes for the chemical to dissolve properly.
6) Bring big plastic that will contain 30 litres of water and pour 19 litres of water and add nitrosol and stir it very well .
7) pour the contents in the buckets ( 1, 2, 3, 4 ,5 ) one after another into the container containing the nitrosol , stir very well . Don't stop stirring until 10 to 15 minutes. 😎 Add foam blaster and stir.
9) Add 3 tablespoons of formalin ( for preservative).
10) Mix your colour in plastic water bottle (Eva plastic empty) and pour water and colour and shake very well and pour it into the mixture and stir.
11) Add the perfume and stir and cover.
12) Allow to set till the next morning .
If you stir it and it is thick add more water to it .
Incase if you want 5 litres or 10 they will give you the. Chemical for it