12/02/2022
How to jump-start a car with a dead battery 💨🛠🔧👇
~Park the car you'll use for jump-starting next to the one with the dead battery, positioned close enough so that the cables will reach. The vehicle shouldn't touch one another.
First of all, you should turn off the ignition on both cars.
~After that, clamp one end of the positive cable(No:1 Red on dead +)to the dead battery positive terminal post and another end of that cable connect to don't vehicle (No:2 Red on doner +) positive terminal post.
~Next, connect the negative cable to the negative terminal post on a good battery(Black on doner)
~Finally, connect the other end of the negative cable to the ground on the vehicle with a dead battery. ( that could be a negative terminal, engine block, vehicle chassis, or vehicle another metal surface.)away from the battery and be careful not to touch the two ends of the cable together while doing this.
~Start the car with a weak battery, if it doesn't start check your connection and tighten or clean as needed.
~If it does start, let the problem car run for at least 10 minutes to allow the battery to recharge before shutting it off.
~If it doesn't start, there may be another problem, call a local service station for help.
Discount the cables in reverse order to like this picture
Dr.mechanics