P.X.C MEDIA

02/05/2024

This is an incredible transformation from DirtShifter Valeting & Detailing I did see thus truck yesterday and it looked dirty and faded everywhere... but what an amazing job 👏 🙌
Dirtshifter

02/05/2024

Some more merch has entered the P.X.C Store click the link below 👇👇😀

Social Media Merchandise

30/04/2024

Anyone with a Panigale that won't start check this video..

This is a Fucati 959 panigale that has a crank but no start issue. The bike suddenly lost power and started to misfire on occasion. After riding back to the ...

29/04/2024

Keep an eye out for the MyMoto NC500 video coming up on YouTube to see how Phil got on with the new Kawasaki Ninja 500

MY MOTO - Leeds MY MOTO - Manchester Kawasaki UK

28/04/2024

The Final Ducati 748 Video is published on the channel. The bike was delivered to the owner over a week ago and let's see what else comes to the garage

This is the final video for the Ducati 748E series. Now, the bike is completed with a second engine oil flush and change.also watch the video to the end as I...

26/04/2024

Several Ducati maintenance videos are published on the channel 😀
Take a look at the reasons you may have clutch drag

DUCATI DRY CLUTCH DRAG PROBLEMS resolved.The last clutch video was about how to rebuild your ducati dry clutch, but in this one, I highlight causes of clutch...

25/04/2024

The work these guys do is probably the finest in the UK 🇬🇧 👌

Check them out Volksbros



Full underbody and cavity anti-corrosive treatments.
Automotive sound deadening.
Metal polishing.
Custom made parts.
Bespoke trophies.
And much more!

https://www.facebook.com/profile.php?id=61554686720719

Welcome to the official Volksbros buisness page.

21/04/2024

Video just published in the channel this is the highlights of the evening with Carl Fogarty, Troy Bayliss and Glenn Irwin check it out hit the link 👇

An Evening With Carl Fogarty, Glenn Irwin, Troy Bayliss at the Nam Ploy Thai Restaurant hosted by Ducati Manchester Group.Sit back and enjoy an evening with ...

10/04/2024

slowly getting through the Ducati work here's a how to install a new dry clutch in the 748 👇👇

Ducati 748 clutch rebuild

03/04/2024

OK so I have just published the Full DUCATI 758 belt fitting video take a look 👇👇👇👇👇

There are many Ducati Timing Belt fitting videos on YouTube, but this is my way of fitting timing belts to a Ducati 748. so take a look and see if this helps

03/04/2024

Do you struggle to fit Ducati Belts ? Then watch this video and see how easy it is 👇👇👇

This is just a demonstration of how to install Ducati Timing belts without struggling. please see my full video on how to do this if you find it difficult to...

01/04/2024

Ducati 748, 916, 996 etc cam belt pulley bearing change video is ready to watch 🫡👇👇🤜

Replace your Ducati belt pulley bearings or at least check them each belt service interval. Don't just replace your belts

28/03/2024

Finally got the RS125 out 😀 check out the video 👇👇

Finally I get to ride my Aprilia RS125 that is super fast. I have not had a ride on one of these since 1999 and after a few miles and a few adjustments I beg...

26/03/2024

Just a little update on where I am with the bikes click the video link bellow 👇👇👇👇

here is an update video about the Aprilia Rs125 and the Ducati 748.I am stuck for time at the moment and waiting for parts to arrive and also the weather to ...

18/03/2024

A little DUCATI 916 project video here for you people take a look 😀

ducati 916 project that is in the worsed condition ever..in this video j have finally dismantled the whole bike ready to start the restoration

15/03/2024

Some wiring repair work here on the 748 and a few tips 👇👇👇👇

Ducati 748 wiring harness repair and service in this video I service the starter solenoid and show you how to replace connectors in the fuse box etc

13/03/2024

Do you want a quick way to remove light Rust ? Then check out this hack I have for you 🤗

How to remove rust fast from a motorcycle fuel tank using Toilet cleaner..

12/03/2024

OK so we have a Ducati 748 in for servicing but turns out there is more work than intended 😬 hit the link to watch the video

This is a clients Ducati 748 that has been standing for several years, and it is my task to get it fully roadworthy again.along the way, I find many problems...

10/03/2024

Well this weather is locking us indoors and all I want to do is some Motocross Micklefield MX
But if you haven't taken a ride on this track then why not get onboard With Richard Cannings DirtShifter Valeting & Detailing and see how great this place is when the sun shines

Onboard With Richard Cannings GoPro Micklefield MX Sunday 15th October whilst I between working on the road bikes I have taken each weekend to ride Motocross...

27/02/2024

Back after a long break here's a ride review of my wife's Aprilia RSV 1000

Ride review after owning this Aprilia RSV 1000 for 2 years. this is a rare 10th Anniversary edition of the Factory spec ...

24/11/2023

All booked in for Racing next year 🙌

💚

18/11/2023

OK so another Ducati 916 video this time I fit the fuel pump orings to stop the leaks and fire it up once again

so I finally got my fuel line orings, and I managed to stop the leaks coming from the quick connectors..So in this video I show you how to remove and replace...

17/11/2023

Another part to my Transit van project "How to fabric wrap the interior"

This video I show you how I fabric wrapped the interior of my ford transit mk7 van, camper

17/11/2023

New video out the Transit Van project check it out I have 2 more videos to publish this weekend 😀

In this video I show you the progress of my ford transit mk7 project. I have already fitted a new floor and electrics...

05/11/2023

Part 2 of the Ducati 916 project will it start ?
Hit the link bellow 👇

Today I finally receive the fuel pump seal, and I give the electrics a good clean for the first start of the Ducati 916.link to the metal fuel line connector...

02/11/2023

Just published the first of my Ducati 916 series video hit the link bellow to watch it 😀👇👇

This is part one of my Ducati 916 project where I start to dismantle the bike and clean out the fuel pump to get the engine started

02/11/2023

More work on the 916 tonight. what does the M mean stamped on the head ? 🤔 and these champion plugs look well old .. also the clutch basket is notched