06/05/2024
New video uploaded to YouTube
Right, now this is a repair of a brand new part I bought from Paddocks. As you will see in the video the finish of machined casting leaves a little to be des...
Hi, I’m Mike, and welcome to my page! I’ve always had a passion for all things electrical and mechanical and enjoy ways of making things better.
There are always a few projects underway in the workshop, most of which I’ll share here.
New video uploaded to YouTube
Right, now this is a repair of a brand new part I bought from Paddocks. As you will see in the video the finish of machined casting leaves a little to be des...
New video uploaded to YouTube
The Defender appears to have an issue. This time the fuel regulator is leaking. In the video I show what I found wrong and how I fixed it, twice!Parts used o...
New video uploaded to YouTube
On my regular check over of the truck where I look for stuff hanging off or missing I spotted what looked like fuel weeping from around the fuel filter. On c...
New video uploaded to YouTube
I've seen a few of these wall clocks on YouTube and thought I'd try them out in the workshop and the house. So far I'm not disappointed!They come in a variet...
New video uploaded to YouTube
I've used flashlamps or torches for as long as I could walk. For business, I always look for the best available and have been through a few I can tell you ov...
New video uploaded to YouTube
I bought an electric file from Ryobi. Although I thought I would never use one of these tools, it was only after using one over at a clients site did I see t...
New video uploaded to YouTube
I bought a small vac from Ryobi for a spot of bench cleaning in the workshop. Take a look at the video and tell me what you thought of it.Remember with Ryobi...
Fancy a quick build? 👉👉
Thanks to Christmas I have in my possession a LEGO Land Rover Classic Defender. This is the complete build of the vehicle. Repair and maintenance will be mo...
Check out my latest post below 😀
The beam/flasher on the indicator stork (XPB101290G) on my TD5 has been poor for a while now and as I had a couple of hours free and a spare unit on hand, no...
New video uploaded to YouTube
I replaced the whole set of filament lamps on my Defender with sealed LED lamp modules thinking I'd never have to do that again. Think again Mike!Link to the...
New video uploaded to YouTube
If you've watched the video then you know both of my voltage testers had failed and so after a bit of a search found the Neoteck at Amazon so bought it.It ha...
New video uploaded to YouTube
If you've watched any of my previous videos you may have come across the Defender step series where I built from scratch air operated deployable steps. If no...
New video uploaded to YouTube
In a previous video I unboxed a Wera C3 wrench that was going to replace my soon to be retiring Norbar torque wrench. Well today, following on from the succe...
New video uploaded to YouTube
New video uploaded to YouTube
I've been looking for a way to organise the family's calendar (and a whole lot more!) and did a bit of a search on Google and found a number of company's who...
New video uploaded to YouTube
I needed to be able to accurately measure a 45degree mitre cut on some wood during the creation of another project and realised I didn't have anything in the...
New video uploaded to YouTube
I've owned a Rode Wireless Go microphone system for a few years and its great. I've uploaded a video about mine, link below. I noticed though if you press th...
New video uploaded to YouTube
Just came across this by accident!
New video uploaded to YouTube
The good people at MJJC reached out to me again and asked if I would like to try their new Foam Cannon V3.0. I said yes please.MJJC state on their website th...
New video uploaded to YouTube
When I'm videoing at a bench I find it useful to be able to see the subject matter and this can be difficult if the camera (iPhone in my case) is in a holder...
New video uploaded to YouTube
These rollers were ordered from China but they didn't put the flat or hole into the unit. 60 rollers later, all done!
New video uploaded to YouTube
We've owned a HotpointNT M11 92XBY UK Heat Pump Tumble Drier for a few years. This replaced an earlier Hotpoint drier. This one died from a possible compress...
New video uploaded to YouTube
I released a video a while ago showing some deep hole markers I had been using and found to be very good. One of the markers, a propelling pencil has been gr...
New video uploaded to YouTube
If you watched part 1 of this series, link here: https://youtu.be/sdUa6Rgptww you would have seen me use a cheap tacho on my Defender instead of the £300+ fr...
New video uploaded to YouTube
Try this, it really works. The piece of rag cart be too thin, apart from that you will find your mirrors stay clean.
New video uploaded to YouTube
You may have seen my earlier videos of the Roamerdrive install. The main reason for installing a tacho (rev counter) is to keep an eye on the revs of the eng...
New video uploaded to YouTube
Best way to open a bag of tie wraps If you cut the corner off the bag they always spill, may be not straight away but certainly before the bag is empty! Trus...
New video uploaded to YouTube
New video uploaded to YouTube
I learnt this 45 years ago and I use this technique daily if I only have side cutters to hand. Try it, it really works!
New video uploaded to YouTube
These rollers are used in a mailing machine. Over time the foam wears down to a point the roller is unusable. I can machine the ends of the foam allowing the...
Be the first to know and let us send you an email when Mike Makes It posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.
Want your business to be the top-listed Media Company?