TIEbreak (2024)

24/03/2022

REBRICKABLE INSTRUCTIONS: https://rebrickable.com/mocs/MOC-106121/TIEbreak/tie-aethernight-tiex8/

YOUTUBE VIDEO: https://youtu.be/HvA89mE04c0

The TIE/x8 Aethernight was a prototype of "laser fighter-bomber" developed by the First Order.

Based on a new approach to torpedoless attack, it was equipped with two long-range turbolaser cannons capable of piercing a corvette's shield with a few shots. For close defense it was equipped with two rapidfire lasers but had to be escorted by at least one interceptor.

The turbolasers were powered by an experimental antimatter cell, as were with the engines and shields. Equipped with a class 0.8 hyperdrive, it was capable of extraordinary speeds in the atmosphere and in space.

It was never tested in real combat by Kylo Ren, who preferred the TIE Silencer, which was more offensive at close range.

24/03/2022

REBRICKABLE INSTRUCTIONS:
-FIRST ORDER: https://rebrickable.com/mocs/MOC-105636/TIEbreak/tie-stingray-tie-sr-fo/
-GALACTIC EMPIRE: https://rebrickable.com/mocs/MOC-105635/TIEbreak/tie-stingray-tiesr-x2/

YOUTUBE VIDEO: https://youtu.be/ydwtj9nxp_g

The TIE/sr x2 experimental air superiority fighter/bomber, also known as the TIE/sr atmospheric fighter or simply the TIE Stingray, was a streamlined variant of the TIE line starfighters developed by the Galactic Empire to succeed the TIE Striker.

With more speed, armament and efficiency for in-atmosphere missions, the atmospheric fighter was identifiable by its horizontal high-speed wings and vertical stabilizers.

Like its predecessor the Stingray was one of the few TIE models to be used by the Imperial Army as well as the Imperial Navy.

24/03/2022

REBRICKABLE INSTRUCTIONS:
https://rebrickable.com/mocs/MOC-105198/TIEbreak/tie-bizarro-tiee1/

YOUTUBE VIDEO: https://youtu.be/9U_oC7_i5CM

This MOC is a huge modification of the JERAC's Tie Fighter MOC

One of the starfighters built by an Imperial research project under the command of Grand Admiral Demetrius Zaarin, the M1 consisted of a single standard TIE/LN starfighter wing panel with two wing braces connected to a pair of standard TIE series cockpit pods.

The port pod held the control systems, and the starboard pod held a turbolaser much heavier than the laser cannons equipped on any previous TIE.

Both pods had the trademark twin ion engines of the TIE series, and the fighter was actually slightly faster than the standard TIE/LN.

The fighter was equipped with a hyperdrive, which was slaved to remote systems in a controller ship.

24/03/2022

REBRICKABLE INSTRUCTIONS: https://rebrickable.com/mocs/MOC-104852/TIEbreak/r2-d2-drinking-tray/

YOUTUBE VIDEO: https://youtu.be/zmBTjIF7a_k

Compatible with LEGO 75308 and 10225 without modification.

In a rescue mission to save Han Solo from Jabba the Hutt, R2-D2 dutifully served drinks to Jabba's guests while hiding Luke's lightsaber for just the right moment.

24/03/2022

REBRICKABLE INSTRUCTIONS: https://rebrickable.com/mocs/MOC-104457/TIEbreak/cobb-vanths-speeder/

YOUTUBE VIDEO: https://youtu.be/4di9nVNb6p0

Cobb Vanth's speeder was a custom-built repulsorcraft vehicle that was made from a modified 620C podracing engine.

Cobb Vanth, the marshal of the Tatooine town Mos Pelgo, used the speeder to travel the Jundland Wastes and protect his people.

He piloted the craft during his attempts to kill a krayt dragon that had terrorized his town around 9 ABY.

24/03/2022

REBRICKABLE INSTRUCTIONS: https://rebrickable.com/mocs/MOC-103091/TIEbreak/tie-chimaera-tiesfb

YOUTUBE VIDEO: https://youtu.be/7vVCjXub0nY

The latest addition to the First Order's Special Forces's arsenal, the aptly nicknamed 'Chimaera', was a starfighter model used by the First Order.

As an advanced version of the standard TIE/se bomber, it was outfitted with enhanced weapons and sensor systems as well as a hyperdrive and deflector shields.

The TIE/sfb was reserved for members of the First Order's elite Special Forces to serve in the first line of attack, carpet bomb and weaken large targets like capital ships in space or buildings on the ground.

24/03/2022

REBRICKABLE INSTRUCTIONS: https://rebrickable.com/mocs/MOC-102205/TIEbreak/tie-avenger

YOUTUBE VIDEO: https://youtu.be/Pwow2jvt_bw

The TIE/ad starfighter, simply known as the TIE Advanced, TIE/Ad or T/A was the culmination of a series of starfighter designs first explored with Darth Vader's TIE Advanced x1.

Incorporating the previous successes of the TIE Series starfighters, along with those of the Rebel Alliance, the TIE Avenger was one of the first production starfighters to break away from the Imperial doctrine of quantity over quality with the inclusion of deflector shields, a hyperdrive, and warhead launchers.

It was also significantly faster and more maneuverable than any existing Imperial or Rebel starfighter, resulting in enemy pilots nicknaming them "brights".

24/03/2022

REBRICKABLE INSTRUCTIONS: https://rebrickable.com/mocs/MOC-102044/TIEbreak/tie-hunter

YOUTUBE VIDEO: https://youtu.be/x5q5vKNAjy4

The TIE/HU Hunter multi-role starfighter was a starfighter from the TIE Series used during the Galactic Civil War by the Galactic Empire.

Developed by the Empire as a means of countering the Rebel Alliance's T-65 X-wing starfighter, the TIE Hunter was used exclusively by storm commandos.

Unlike most other contemporary TIEs of the time, TIE Hunters were equipped with a hyperdrive and shields, making them more valuable than most starfighters the Empire utilized.

Because of these characteristics, it was also considered to be the fastest TIE variant among the Imperial fleet.

24/03/2022

REBRICKABLE INSTRUCTIONS: https://rebrickable.com/mocs/MOC-101562/TIEbreak/scorpenek-droid/

YOUTUBE VIDEO: https://youtu.be/EfnMnRdKvMc

Similar to Droidekas in both design and function, Scorpenek droids were towering four-legged battle droids, with twin extended arms, mounted with laser weaponry. These appendages linked back into the droid's rear.

24/03/2022

REBRICKABLE INSTRUCTIONS: https://rebrickable.com/mocs/MOC-100537/TIEbreak/tie-droid/

YOUTUBE VIDEO: https://youtu.be/E0dHFse261c

Also known as droid/drone TIE fighter, it was a TIE Series starfighter used by the reborn Emperor Palpatine.

The TIE/d had an integrated droid brain which could be updated with new tactics—despite this, it was still often easily outwitted by sentient starfighter pilots.

It took the standard TIE Series command pod with twin ion engines and twin laser cannons, additional armor plating and rectangular wing panels with adjustable pitch were added.

Despite its heavier armor, the TIE/d could actually reach high atmospheric speed overall, they were fast, small, and very expendable.

24/03/2022

REBRICKABLE INSTRUCTIONS: https://rebrickable.com/mocs/MOC-99809/TIEbreak/octuptarra-magna-tri-droid/

YOUTUBE VIDEO: https://youtu.be/tj7Jfffcxm8

Two color schemes available:
-Dark Tan for Trade Federation
- Blue for C.S.I.

The octuptarra tri-droid, also known simply as the octuptarra droid or tri-droid and nicknamed the "virus droid" due to the biological plagues it sometimes carried, was a model of three-legged droid walker manufactured by the Techno Union.
Produced in a number of different sizes, including agile octuptarra combat tri-droids and gigantic octuptarra magna tri-droids, they were used by the Confederacy of Independent Systems during the Clone Wars.
This model was an up-scaled version of the smaller octuptarra combat tri-droid.
The Techno Union developed the combat version first, re-using the design later for the much larger heavy artillery version of an infantry battle droid.

24/03/2022

LM-432 Crab Droid

REBRICKABLE INSTRUCTIONS: https://rebrickable.com/mocs/MOC-99108/TIEbreak/lm-432-crab-droid/

YOUTUBE VIDEO: https://youtu.be/NCR46Pdv-LA

24/03/2022

REBRICKABLE INSTRUCTIONS: https://rebrickable.com/mocs/MOC-98664/TIEbreak/tie-raptor

YOUTUBE VIDEO: https://youtu.be/PfCxSoFN1cM

The TIE/rpt starfighter, or TIE Raptor, was an unofficial, smaller variant of the standard TIE Fighter. Although not as fast as a TIE Interceptor, it was as maneuverable as an A-wing, and heavily armed, with four laser cannons and two concussion missile tubes.

The Raptor also had a very strong hull, compared to the standard TIE/ln. A few prototypes were also equipped with shields.

The TIE Raptor was designed by Imperial engineers under command of Admiral Zsinj in the years after the Battle of Endor.

Sienar Fleet Systems played no role in the project aside from creating the original TIE series design lineage, and the Raptor ultimately saw little or no use among units of the Imperial Navy.

24/03/2022

REBRICKABLE INSTRUCTIONS: https://rebrickable.com/mocs/MOC-98334/TIEbreak/tie-predator

YOUTUBE VIDEO: https://youtu.be/8TGbj-dzHZ0

The Predator-class fighter, also called the TIE Predator and nicknamed Eyeballs by the Galactic Alliance, was a starfighter produced by Sienar Fleet Systems and used by the New Galactic Empire.

Considered a successor to the older TIE/In interceptor more than a century prior, the TIE/pr was still highly maneuverable and heavily armed, but unlike most previous TIEs, it was also equipped with hyperdrive and a deflector shield generated through its blade-shaped wings.

These wings could adjust to a variety of positions, aiding the starfighter's maneuverability. They folded back fully for docking mode.

However, the complex technologies packed inside the wings of the Predator were a maintenance nightmare.

23/03/2022

REBRICKABLE INSTRUCTIONS: https://rebrickable.com/mocs/MOC-97782/TIEbreak/tie-silencer-ucs-tievn

YOUTUBE VIDEO: https://youtu.be/TTOblJNqce8

One of the most powerful space superiority fighter in the 1st Order fleet, the TIE Vendetta aka "Silencer" features heavy weapons than can crack even the thick armor of massive cruisers.

Larger than most other one-pilot starfighters, the TIE Vendetta prototype is both fast & agile.

Sienar-Jaemus Fleet Systems designers customized the TIE protoype's flight & weapons controls for the its test pilot Kylo Ren.

-UCS scale
-Built and tested IRL
-Length: 64cm
-Width: 27.3cm
-Height: 15.2cm (28.5cm with stand)
-Parts count model / stand: 1954 / 133

23/03/2022

REBRICKABLE INSTRUCTIONS: https://rebrickable.com/mocs/MOC-97764/TIEbreak/tie-arrowhead-tieah/

YOUTUBE VIDEO: https://youtu.be/CF3bSoBEe6k

The Arrowhead was an experimental stealth starfighter developed by the First Order and manufactured by Sienar-Jaemus Fleet Systems.

Equipped with an optical cloaking device that rendered it invisible, the Arrowhead had a characteristic asymmetric shape due to its technology, with a red cloak projector panel and a big solar array.
It was armed with an ion cannon, a rapid fire laser cannon and a concussion missile launcher.

The only prototype was destroyed during the Battle of Exegol before it could shed his first blood.

-Minifig scale
-Built and tested IRL
-Length: 41.5cm
-Width: 18.1cm
-Height: 16.0cm
-Parts count: 605

23/03/2022

REBRICKABLE INSTRUCTIONS: https://rebrickable.com/mocs/MOC-97443/TIEbreak/tie-nexus-tienx/

YOUTUBE VIDEO: https://youtu.be/AGc1sysVjCw

The Nexus assault bomber a.k.a. "flying squirrel" was an experimental heavy bomber based on TIE Series technology.
It was developped by the Sith Eternal and Sienar-Jaemus Fleet Systems.

The Nexus was mainly used in the atmosphere to support the land forces and carry out surface bombardments (dive bombing).
It was also capable to be used as a tactical reconnaissance vessel with the installation of detection equipment and defensive jammers in place of offensive charges.

The only three ships produced were destroyed during the Battle of Exegol, before moving on to mass production.

-Minifig scale
-Built and tested IRL
-Length: 32.6cm
-Width: 34.7cm
-Height: 18.5cm
-Parts count model/stand: 1623/58

TIEbreak

24/03/2022

24/03/2022

24/03/2022

24/03/2022

24/03/2022

24/03/2022

24/03/2022

24/03/2022

24/03/2022

24/03/2022

24/03/2022

24/03/2022

24/03/2022

24/03/2022

23/03/2022

23/03/2022

23/03/2022

Address

Website

Alerts

Shortcuts

Share