Diy Phil - Youtuber

17/12/2023

Build video comming soon.

06/08/2023

Full video on my YouTube channel.

06/08/2023

https://youtu.be/xKDrsSBchpQ

This is a short demonstration of the capability of my homemade powder coating gun to coat a part with "faraday cage" areas. Below links to videos of the home...

14/07/2023

Added a Gema OptiFlow Powder Injector to my homemade powder coating gun.

05/07/2023

Thank you to all the Subscribers to my YouTube channel

05/06/2023

My latest DIY Powder Coating Gun, Video in my YouTube channel coming soon!

17/06/2022

https://youtu.be/x0ZP6tiDZs4

18/05/2022

https://youtu.be/kj_0Crict8g

This is the latest development with my home brew, home made powder coating gun. I bought a cheap set of commercial gun nozzle and fitted it to my gun. I talk...

15/04/2022

A glimpse of what I do for a living
https://youtu.be/bbKwv7NdizI

Another glimpse to how rope access NDT technician works. A simple task of performing MPI on welds. As is usually the case when doing MPI, surface preparation...

01/04/2022

https://youtu.be/d5P7Opt-o2Q

I modified the electric counter top kitchen oven to be used in powder coating. I improved the insulation and equipped it with PID Temperature Controller for ...

30/03/2022

Another video about homemade powder coating.
https://youtu.be/aaLc6K-r8Ic

Hi. This is the update to my homemade powder coating gun v.3. I'll show you how to use it. I also show you the complete circuit diagram of the assembled gun ...

08/11/2021

Be sure to watch my Wheel Building video on YouTube. Part 1 is lacing the spokes and Part 2 is truing the wheel.

05/11/2021

https://youtu.be/jJm6EpnzTnQ

This is the latest version of my homemade powder coating gun power supply. I already gave up the idea of using the taser module as the high voltage generator...

04/11/2021

Homemade Powder Coating Gun High Voltage Cascade Power Supply. Full Video in YouTube

03/11/2021

Very simple yet useful electronics project.
https://youtu.be/8eCuureog8k

I converted an old (UPS) Uninterruptable Power Supply to be used as a bench top adjustable voltage power supply. The UPS is defective but most of these scrap...

31/10/2021

https://youtu.be/XaixWxOfr5w

Ultrasonic (UT) Slip / Upset Area inspection of drill pipes using the GE USM 35 ultrasonic flaw detector. Scanning using single probe hand technique. Example...

18/10/2021

Full video in YouTube

18/10/2021

https://youtu.be/aSb8-u630_c

In this video, I will show you how I repaired and restored a pair of old Yamaha DT125 / DT175 motorcycle wheel hubs I got from the junk shop. Work includes r...

16/10/2021

Latest update to my homemade powder coating gun. HV cascade on the gun barrel. Videos coming soon.

26/09/2021

https://youtu.be/u0rpHi2AOgQ

Changing the stock rear wheel of the CB500X with spoke wheels using the wheel hub of the CRF250L. CB500X rear disk brake and brake caliper modification to fi...

10/09/2021

This is my homemade center stand for my Honda CRF250L motorcycle. Very simple yet useful and easy to make. Please see the full video in YouTube for more details including dimensions.

08/09/2021

Check out my latest DIY project. An update to my homemade powder coating gun I used to powder coat the wheel hub of my Yamaha DT motorcycle. Full video on YouTube.

27/08/2021

https://youtu.be/okMX84yATyg

Repair and restoration of an old Yamaha DT 125 forks. I bought the forks in the scrap yard and I restored it to be part of my Yamaha DT175 bike build project...

18/08/2021

I'm very happy with how my first ever attempt at lacing ang truing a spoked wheel turned out. Very satisfying to Do It Yourself. More videos and contents coming up in YouTube.

11/08/2021

Just finished powder coating the wheel hubs and excited to lace the wheels. More video contents coming soon of my home made powder coating and motorcycle build.

09/07/2021

DIY Bike Lift Build, coming soon!

02/06/2021

This is the second instalment of my CB500X Rally Build videos. I hope you like it.

https://youtu.be/RYXeHPO8miM

This is the second installment of my attempt to build the most off-road capable Honda ever by transplanting a full dirt bike suspension to the Honda ...

28/05/2021

New content uploaded to my Youtube Channel. Please support it. Thanks.
https://youtu.be/U5DrGAX5xFI

This is my attempt to build the most off-road worthy Honda CB500X ever by transplanting a full dirt bike suspension to the Honda CB500X. Focus on off-road pe...

23/04/2021

https://youtu.be/dBqvPxmoVpM

Have a glimpse of how NDT inspection is done offshore and at heights.