Chasin' Jason

  • Home
  • Chasin' Jason

Chasin' Jason Welcome to my creator showroom where I share my adventures in the radio control hobby.

All the Flite Crew fun from Wings Over Edgewater.
09/06/2024

All the Flite Crew fun from Wings Over Edgewater.

The Crew gets together to attempt a community request and do a lot of other fun stuff at Wings Over Edgewater 2024What is Flite CrewFlite Crew are a group of...

Happy to have an uneventful 20 mile scooter ride this morning, I guess I fixed it right. I found BB-8 in the sky along t...
08/06/2024

Happy to have an uneventful 20 mile scooter ride this morning, I guess I fixed it right. I found BB-8 in the sky along the way.

Sometimes you should slow down and enjoy the view.
04/06/2024

Sometimes you should slow down and enjoy the view.

Highlights from streamer combats and a Blue Angels flight from Edgewater Airpark.

04/06/2024

A couple weeks ago my scooter died during a ride around the neighborhood. I tore out all the wiring and discovered the ESC to motor connectors were cheap and had failed miserably. Using all the knowledge that I've gained during the last few years in RC, I was able to replace the connectors with quality bullet connectors and this happened!! I have since replaced the tape with shrink tube and went on a 2 mile test ride. All is well.

01/06/2024

A Sea Duck in its natural habitat.

I call mine the TT Zoom. If you know, you know. Maiden tomorrow, unfortunately it will be in the daylight.
01/06/2024

I call mine the TT Zoom. If you know, you know. Maiden tomorrow, unfortunately it will be in the daylight.

25/05/2024

Some video from the FT Sea Duck maiden.

Took delivery of another Tim Simons Flite Test masterpiece today. This Sea Duck flies as good as it looks. I can't wait...
25/05/2024

Took delivery of another Tim Simons Flite Test masterpiece today. This Sea Duck flies as good as it looks. I can't wait to try it on water!

21/05/2024

Now witness the awesomeness of this fully configured and operational DJI Avata 2! Shot in full acro/manual mode in 4k 60fps with ND32 filter and stabilized with Gyroflow. Very happy with the results.

If you look carefully you can see downtown Cleveland.
17/05/2024

If you look carefully you can see downtown Cleveland.

Sunset pictures are just better from 395 ft up.
13/05/2024

Sunset pictures are just better from 395 ft up.

07/05/2024

Well, let's get this party started with a LinkedIn profile.

Video from my visit to Thompson Prop Busters.
04/05/2024

Video from my visit to Thompson Prop Busters.

I was invited out to the Thompson Prop Busters club in Thompson, OH to film a re-maiden of a classic airplane.

It was a beautiful evening for flying! I was invited to Thompson Prop Busters to chase the re-maiden flight of this airp...
03/05/2024

It was a beautiful evening for flying! I was invited to Thompson Prop Busters to chase the re-maiden flight of this airplane. Filmed two perfect flights.

At long last, the recap video from the final indoor event of the season.
28/04/2024

At long last, the recap video from the final indoor event of the season.

We ended the indoor season with a bang! (and a combat!!)Follow NE Ohio Indoor R/C Fly on Facebook to get info on future events.https://www.facebook.com/OhioE...

A slow cruise around Edgewater Airpark during the open house yesterday.
28/04/2024

A slow cruise around Edgewater Airpark during the open house yesterday.

Spooner's DJI Avata chased by Chasin' Jason's DJI Avata 2 . . . quite an Avata Adventure around Edgewater.What is Flite CrewFlite Crew are a group of volunte...

28/04/2024

Little clip from the Edgewater Airpark open house today. Some very interesting airplanes . . . very interesting.

At the Edgewater Airpark open house today and picked up two pretty important planes, to me anyway. The white RV-12 is th...
27/04/2024

At the Edgewater Airpark open house today and picked up two pretty important planes, to me anyway. The white RV-12 is the one we built with a group of kids at Oshkosh. The blue one is from the Flite Test build video that was my first edit for them and the one I almost crashed into a C-47 at Oshkosh.

23/04/2024

I took some time away from filming WhirlyBall Cleveland league play to practice for a future shoot.

Back at WhirlyBall Cleveland, but this time it's official!
22/04/2024

Back at WhirlyBall Cleveland, but this time it's official!

Cloudless sunset on the north coast tonight.
22/04/2024

Cloudless sunset on the north coast tonight.

And here it is! The new DJI Avata 2. I've flown three batteries now and learned what most of the buttons do. This is a q...
19/04/2024

And here it is! The new DJI Avata 2. I've flown three batteries now and learned what most of the buttons do. This is a quick highlight video from the last battery.

A quick highlight video from the third battery I flew on the DJI Avata 2. This is going to be a very good tool for me!Recording settings2k 60fps10-bit D-Log ...

Messing around with Copilot . . . finally got something acceptable. What do you think?
18/04/2024

Messing around with Copilot . . . finally got something acceptable. What do you think?

16/04/2024

Last bit of the first flight of the new addition to my rc hanger. Can you guess what it is?

09/04/2024

Yeah, I flew an airplane during the eclipse . . . and someone was nice enough to look away for a second and get a clip. It was amazing! Thank you to Tim Simons for the great work on the Arrows RC Big Foot.

Beautiful day for chasing Jason "Miller Time" Miller's new E-flite Decathlon RJG.
08/04/2024

Beautiful day for chasing Jason "Miller Time" Miller's new E-flite Decathlon RJG.

Time for a much needed day in the sky! Heading to Edgewater Airpark for the day.
07/04/2024

Time for a much needed day in the sky! Heading to Edgewater Airpark for the day.

What's the cheapest way to get a new quad... rehab old ones you haven't flown in a while. The Sidewinder and Beta95X wil...
06/04/2024

What's the cheapest way to get a new quad... rehab old ones you haven't flown in a while. The Sidewinder and Beta95X will be getting switched to ELRS and I'm going to finally build the Hemi Gremi.

Address


Website

Alerts

Be the first to know and let us send you an email when Chasin' Jason posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Videos

A couple weeks ago my scooter died during a ride around the neighborhood. I tore out all the wiring and discovered the ESC to motor connectors were cheap and had failed miserably. Using all the knowledge that I've gained during the last few years in RC, I was able to replace the connectors with quality bullet connectors and this happened!! I have since replaced the tape with shrink tube and went on a 2 mile test ride. All is well.

A Sea Duck in its natural habitat.

Some video from the FT Sea Duck maiden.

Billy Shaw with the crazy tail drag to kick off Wings Over Edgewater!

Now witness the awesomeness of this fully configured and operational DJI Avata 2! Shot in full acro/manual mode in 4k 60fps with ND32 filter and stabilized with Gyroflow. Very happy with the results.

Little clip from the Edgewater Airpark open house today. Some very interesting airplanes . . . very interesting.

I took some time away from filming WhirlyBall Cleveland league play to practice for a future shoot.

This is going to be fun!
This is going to be fun!

Last bit of the first flight of the new addition to my rc hanger. Can you guess what it is?

Yeah, I flew an airplane during the eclipse . . . and someone was nice enough to look away for a second and get a clip. It was amazing! Thank you to Tim Simons for the great work on the Arrows RC Big Foot.

You see . . . what had happened was . . .

The hobby is strong with this one. Also notice the finished 7" quad in the middle.

Kirby was getting angry, so it was time to start soldering the 7" rebuild. Progress was made.

A clip from the first full flight of my new cinewhoop that I've decided to call the "Oddi-T" (Oddityrc Mage Pro HD frame and T-Motor FPV drivetrain). Hoping to do my first paid shoot at this location soon!

Almost as good as flying! A 20 mile scooter ride after work hit the spot.

It's been a minute since I've fired up the 3D printer. The 7" quad needs parts!

Build live streams will be back soon! Maybe even this weekend.

I like it! Thanks again Fatstrapfpvcom Steve Panebianco

When you have the entire place to yourself you take a few more risks and nearly "land" on top of HQ.

It sure felt good chasing outside again! Especially when it's a custom made Flite Test Bravo XL by Joshua Billiter. Full video coming soon on my YouTube channel.

At least all the hobby stuff in the basement make for good whoop obstacles. Flying my NewBeeDrone Hummingbird V3.

Shortcuts

  • Address
  • Alerts
  • Videos
  • Claim ownership or report listing

  • Want your business to be the top-listed Media Company?

Share