04/03/2023
Glued up this big 3.6m walnut bench top today. It took a while to get the pieces jointed properly because they were FAR too big for my jointer thicknesser.
Welcome to the page I’ve dedicated to documenting my woodworking hobby! I’ll do my best to post regular photos, cool video and updates on my latest projects.
Feel free to like the page to keep up to date with what I’m up to. Cheers,
Julian
Glued up this big 3.6m walnut bench top today. It took a while to get the pieces jointed properly because they were FAR too big for my jointer thicknesser.
After a lot of wrestling and trimming, my new router table has been installed in the wing of the table saw. Can anyone spot the big design flaw?
Now THAT’S exciting!
I stumbled across some old footage that I never got around to editing.
I made this board as a Secret Santa present… in 2020.
Have you seen my latest YouTube video? Follow the link here: https://youtu.be/X2S_lEOg83o
It shows me absolutely nailing the build of this solid walnut picture frame for Dean Graham.
Perfect mitres? Check ✅
Splined corners? Check ✅
Awesome grain and contrast? Check ✅
Blowing my own horn? Check ✅
What more could you ask for?
I made these built-in shelves for some great friends, and recently went back to visit them… the friends, not the shelves. Couldn’t be happier with how they turned out!
I finished off this on the weekend, made from a beautiful old piece of timber donated to me by my father in law. I think I’ve done it justice!
I really tried to make sanding look interesting… but I… it just can’t be done 🤦♂️
These two are just about ready; only finishing touches to go. Stay tuned!
For those that have been asking; I’ve got a batch of my homemade chopping board polish ready to go out to family and friends 😁
Here’s a quick video showing the process I used to give our chopping board a makeover.
I’ve made a batch of my very own chopping board polish, and I couldn’t be happier with the results.
Here’s a of the daily use chopping board in our house.
The board was a gift from my father in law and has stood brilliantly to daily abuse, but was in dire need of a
The ends are sealed, and the timber is stacked, spaced, and strapped.
There’s some lovely and in that stack that I can’t wait to put to use.
I went on a today to collect a stack of timber. It’s straight from the mill, and most of it is still , so I’ll be going through the process of drying it correctly before I can get stuck in to some
Ahh… so THAT’S why the vacuum wasn’t sucking. Might be time for a new filter 🤔
and all milled up and ready for new projects!
When you finally get a day off to spend in the workshop… and your bandsaw blows a drive belt 😠
I love a video!
It took me way too long to align all the boards because I was being lazy and couldn’t be bothered making cauls.
Putting my new feather board to work on these oak boards. I took the last one off the shelf at Perth 😆
Next step for these shelves is planing the timber to the correct thickness. After a few passes through this machine, The timber will end up with a second face which is perfectly parallel to the other.
I spent last weekend squaring up some rough-sawn American oak to make shelves for friends of mine. Great to be back in the shed.
I’ll make sure I keep you posted with the progress of this project.
It’s been a while since I’ve posted anything, so here’s my latest
It’s , , and
@ Perth, Western Australia
“I’m not chopping on that!” -My Mum, Christmas 2020.
This chopping board was made to be used, but it looks like it’s destined to just go on display 😆😂
Here’s the finished product. I put this one together in a few hours, with a couple of $30 sleepers from Bunnings.
I’m really happy with how it’s improved the look of the garden, even if it’s just keeping the wood chips off the path.
There’s more than one way to cut a !
Using the is definitely the quickest method for the smaller pieces, but I had to get the out and do some for the big 3 metre lengths.
I gave my table saw a workout ripping these jarrah sleepers to use as garden edging. I used a combo blade, which gave a great finish, but I might have to invest in a more aggressive ripping blade in the future.
Today I started my
Apparently swapping stickers is a thing woodworkers do 🤷♂️ Thanks to for being the first contributor.
Get in touch if you want to help me fill up the empty space 👍😁
I spent today cutting hinge mortises for a project I’m working on.
I’m looking forward to revealing it once it’s done! 😏
I’m getting more confident at breaking down full sheets of plywood on the table saw. Having a decent out-feed table makes it less of a balancing act 👍
Be the first to know and let us send you an email when Shaping Sawdust posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.
I stumbled across some old footage that I never got around to editing. I made this board as a Secret Santa present… in 2020. #shapingsawdust #servingboard #cuttingboard
I really tried to make sanding look interesting… but I… it just can’t be done 🤦♂️ These two #endgraincuttingboards are just about ready; only finishing touches to go. Stay tuned! #shapingsawdust #makingsandingsexy #sexywalnut
For those that have been asking; I’ve got a batch of my homemade chopping board polish ready to go out to family and friends 😁
Here’s a quick video showing the process I used to give our chopping board a makeover. #shapingsawdust #choppingboardrestoration #likenew
Ahh… so THAT’S why the vacuum wasn’t sucking. Might be time for a new filter 🤔 #shapingsawdust #shopvac #cloglife
I love a #glueup video! It took me way too long to align all the boards because I was being lazy and couldn’t be bothered making cauls. #shapingsawdust #satisfying #parrallelclamps
Putting my new @magswitch_tech feather board to work on these oak boards. I took the last one off the shelf at @carbatec Perth 😆 #shapingsawdust #americanwhiteoak #featherboard
Next step for these shelves is planing the timber to the correct thickness. After a few passes through this machine, The timber will end up with a second face which is perfectly parallel to the other. #shapingsawdust #thicknesser #customshelves
I spent last weekend squaring up some rough-sawn American oak to make shelves for friends of mine. Great to be back in the shed. I’ll make sure I keep you posted with the progress of this project. #shapingsawdust #jointer #newproject
Here’s the finished product. I put this one together in a few hours, with a couple of $30 sleepers from Bunnings. I’m really happy with how it’s improved the look of the garden, even if it’s just keeping the wood chips off the path.
There’s more than one way to cut a #halflapjoint ! Using the #tablesaw is definitely the quickest method for the smaller pieces, but I had to get the #handtools out and do some #unpluggedwoodworking for the big 3 metre lengths. #shapingsawdust #aussiewoodworker #gerdenedging
I gave my @carbatec table saw a workout ripping these jarrah sleepers to use as garden edging. I used a @cmt_orangetools combo blade, which gave a great finish, but I might have to invest in a more aggressive ripping blade in the future. #shapingsawdust #tablesaw #gardenedging
Today I started my #stickerwall Apparently swapping stickers is a thing woodworkers do 🤷♂️ Thanks to @fixitfingers for being the first contributor. Get in touch if you want to help me fill up the empty space 👍😁 #shapingsawdust #stickerswapwoodworking #stickertrade
I spent today cutting hinge mortises for a project I’m working on. I’m looking forward to revealing it once it’s done! 😏 #shapingsawdust #mortise #router
I’m getting more confident at breaking down full sheets of plywood on the table saw. Having a decent out-feed table makes it less of a balancing act 👍 #shapingsawdust #tablesaw #plywood
Here’s the final #glueup for this chopping board. Next I’ll square up the edges and spend some time #sanding ... then some more sanding. #shapingsawdust #endgraincuttingboards #almostthere
This #endgraincuttingboard is starting to take shape. The large pink sections and the darker red strips are just different pieces of #jarrah 😍 #shapingsawdust #workinprogress #choppingboard
This really sucks. #badpuns I upgraded to a cartridge style filter on my dust extractor this week; I wish I’d done it sooner! The airflow is noticeably better and apparently it’s better at filtering than the old needle felt bag. #shapingsawdust #dustextraction #cartridgefilter
Want to hear the most annoying sound in the world? Listen to this blunt blade struggle at the end of the video 😫 It’s #newtooltuesday I scored a bargain on a second hand bandsaw recently, which was unfortunately missing the fence. I picked out the #kregaustralia precision band saw fence and made it fit. Now to watch all the metalworkers squirm watching a woodworker try to tap a thread 😆 😂 #shapingsawdust #bandsaw #newtools
Want your business to be the top-listed Media Company?