More of the Kei Truck
Sitting On A Stock Deadbolt & Scx24 Tires.
#RaddConcept
The 1AKind Opposite Cylinder UpRight Steam Engine. My custom made project from A Fleischmann Antique Steam Engine.
Steam pressure auto pop starts the engine by placing A cylinder piston slightly past TDC on its power stroke. At TDC, nearly both the Intake & Exaust Ports on the Port Face are closed between the strokes to build steam pressure.
Although Not Perfect (Experimental) currently troubleshooting a pressure leak between the Port Face & Cylinder 2. The Upright Boiler ALSO just doesn't have enough Volume for two cylinders to run long. Being antique it is hard to trust under high steam pressure & Im careful with the fuel consumption.
The Fleischmann is also fixed with A Recycling ♻️ Stack. (Work in progress) As steam travels out the cylinder exaust ports it is routed into the Tall Stack that has A Glass Accumulater at the top that catches water droplets. Collecting the water from the Steam. Collected water is then routed into a cold storage tank where it is then pumped by hand on command with A Direct Boiler Plumbed Piston Water Fill Pump allowing the boiler to be filled under pressure.
The boiler also features A safety pressure release pop off valve & steam whistle.
#RaddConcept
Little Apollo Likes to Rocket
#RaddConcept
Scx6 Fell Off the Cliff Side
MINITRUCK ADVENTURES
On an OffRoad Adventure!
#RaddConcept
A Load of Rocks to Dump!
#RaddConcept
Took the side dump trailer out for a bit more tests.
So far it has performed Great!
#RaddConcept