MagPi Nederland

  • Home
  • MagPi Nederland

MagPi Nederland MagPi-magazine gaat op een praktische manier in op de nieuwste ontwikkelingen en trends rondom de Ra

We hebben vandaag droevig nieuws te melden. Het aankomende maart/april nummer zal het einde betekenen van MagPi Magazine...
20/02/2024

We hebben vandaag droevig nieuws te melden. Het aankomende maart/april nummer zal het einde betekenen van MagPi Magazine in het Duits, Nederlands en Frans. Nadat alle betalende leden al op de hoogte zijn gebracht (jij nog niet? E-mail ons op [email protected]!), willen we ook van jullie, lieve online community, afscheid nemen en jullie bedanken voor alle steun. Ook het Duitse, Nederlandse en Franse MagPi online account zal namelijk worden opgeheven.

De Engelse editie van 'The MagPi Magazine' blijft natuurlijk gewoon verschijnen bij de Raspberry Pi Foundation, zodat de waardevolle content en de levendige internationale community blijven voortbestaan.

The Elektor Super Servo Tester can control servos and measure servo signals. It can test four servo channels at the same...
08/12/2023

The Elektor Super Servo Tester can control servos and measure servo signals. It can test four servo channels at the same time. The Super Servo Tester comes as a kit and here is how you assemble it.
https://ow.ly/FyXJ50QgP2a

Join us for a webinar on Thursday, December 7, 2023 (4:00 PM Berlin) to learn about the Elektor Labs platform. Engineers...
04/12/2023

Join us for a webinar on Thursday, December 7, 2023 (4:00 PM Berlin) to learn about the Elektor Labs platform. Engineers Jean-François Simon and Saad Imtiaz will introduce you to the Elektor Labs online platform, which you and other innovators can use to present design and to collaborate on electronics projects and products. Register Now https://ow.ly/oxTf50Qfg5X

Design Rewind: Temperature Gradient Meter, VFD Tube Clock, and More Engineeringhttps://ow.ly/eTHf50Qb3VqWant a project t...
25/11/2023

Design Rewind: Temperature Gradient Meter, VFD Tube Clock, and More Engineering
https://ow.ly/eTHf50Qb3Vq
Want a project that will enable you to measure air quality? You can get it done with a Raspberry Pi RP2040 and a little know-how. Dr. Claus Kühnel's design acquires data from a CO2 sensor and transmits it via an ESP8266 to ThingSpeak.

MagPi n°33 (November-December 2023)Het nieuwste nummer staat weer boordevol nieuws, recensies, praktische handleidingen ...
24/11/2023

MagPi n°33 (November-December 2023)
Het nieuwste nummer staat weer boordevol nieuws, recensies, praktische handleidingen en een groot aantal doe-het-zelf projecten.
Maak, bestuur en programmeer robotarmen en -benen met Python
Praktijk: Een robotarm besturen met
Maak kennis met de

Deze   Ultimate Starter Kit bevat alles wat je nodig hebt om meteen aan de slag te gaan met de nieuwste versie van 's we...
21/11/2023

Deze Ultimate Starter Kit bevat alles wat je nodig hebt om meteen aan de slag te gaan met de nieuwste versie van 's werelds populairste minicomputer als ontwikkel- en multimedia-apparaat.
https://ow.ly/amnT50Qa12S

Video: Learn how to select and use an  https://ow.ly/GP2P50Q9cMsAn oscilloscope is a handy instrument that displays the ...
19/11/2023

Video: Learn how to select and use an
https://ow.ly/GP2P50Q9cMs
An oscilloscope is a handy instrument that displays the evolution of one or more voltages over time. With an oscilloscope, you can do things that you cannot do with a mulitmeter. Here are some tips for selecting and using an oscilloscope.

Joy-Pi Advanced Ontwikkelplatform voor  ,   en  https://ow.ly/5ZAV50Q8v1WDankzij de compatibiliteit met een groot aantal...
16/11/2023

Joy-Pi Advanced Ontwikkelplatform voor , en
https://ow.ly/5ZAV50Q8v1W
Dankzij de compatibiliteit met een groot aantal platformen, kun je eenvoudig en snel toegang krijgen tot het platform van je voorkeur.

Elektor News Bytes - Show  #8 In this episode, Stuart Cording, The  , looks at: CAN-FD Motor Driver, Hall Sensor, Load S...
15/11/2023

Elektor News Bytes - Show #8
In this episode, Stuart Cording, The , looks at: CAN-FD Motor Driver, Hall Sensor, Load Switch, and more!
https://ow.ly/23em50Q82Mb

Welcome to show #8 of News Bytes, Elektor's news show looking at what's happening in the electronics and semiconductor industry.This episode is sponsored by ...

Je kunt snel innovatieve Bluetooth Low Energy (BLE)-ontwerpen realiseren met STM32-oplossingen en enkele inzichten van S...
13/11/2023

Je kunt snel innovatieve Bluetooth Low Energy (BLE)-ontwerpen realiseren met STM32-oplossingen en enkele inzichten van ST-technici. Registreer vandaag voor het webinar van 30 november 2023 (16:00 uur), "Fast Track Your Bluetooth Low Energy Design with STM32."
https://ow.ly/q4hz50Q75S8

Tired of hand PCB assembly? Watch this video https://ow.ly/505W50Q6KL4 You'll see the Pixel Pump in action as Robin asse...
12/11/2023

Tired of hand PCB assembly? Watch this video https://ow.ly/505W50Q6KL4 You'll see the Pixel Pump in action as Robin assembles a demo board, which is actually a part of the Pixel Pump itself, showing the practicality of the tool.

MAGPI NOVEMBER/DECEMBER IS BESCHIKBAAR!https://ow.ly/7uMb50Q6KQlHet nieuwste nummer staat weer boordevol nieuws, recensi...
12/11/2023

MAGPI NOVEMBER/DECEMBER IS BESCHIKBAAR!
https://ow.ly/7uMb50Q6KQl
Het nieuwste nummer staat weer boordevol nieuws, recensies, praktische handleidingen en een groot aantal doe-het-zelf projecten.

Het nieuwste nummer staat weer boordevol nieuws, recensies, praktische handleidingen en een groot aantal doe-het-zelf projecten.

An oscilloscope is a handy instrument that displays the evolution of one or more voltages over time. With an oscilloscop...
10/11/2023

An oscilloscope is a handy instrument that displays the evolution of one or more voltages over time. With an oscilloscope, you can do things that you cannot do with a . Here are some tips for selecting and using an .

An oscilloscope is a handy instrument that displays the evolution of one or more voltages over time. With an oscilloscope, you can do things that you cannot ...

The Pixel Pump is a pick and place tool that aims to fill the gap between manually populating a board with tweezers and ...
08/11/2023

The Pixel Pump is a pick and place tool that aims to fill the gap between manually populating a board with tweezers and a low-cost PnP machine. With it, placing parts remains manual, but with improved precision and comfort.
https://ow.ly/lNH850Q5CQo

Join Erik Jansen, Managing Director at Elektor, and Wendy Covey, CEO of  Marketing as they explore European engineer mar...
05/11/2023

Join Erik Jansen, Managing Director at Elektor, and Wendy Covey, CEO of Marketing as they explore European engineer marketing preferences based on the comprehensive research in Decoding Engineer Preferences. https://ow.ly/5XAv50Q4lvM

Introducing the Pixel Pump Handheld Pick & Place Machinehttps://ow.ly/JFCv50Q4luo
05/11/2023

Introducing the Pixel Pump Handheld Pick & Place Machine
https://ow.ly/JFCv50Q4luo

The Pixel Pump by Robin's is a small tool to pick and place SMT components (SMD) easliy on a printed circuit board (PCB). The Pixel Pump is intended for hobb...

Join our webinar with MIPI Alliance: "Introducing MIPI I3C – the Next-Generation Serial Communication Bus" Secure your s...
02/11/2023

Join our webinar with MIPI Alliance: "Introducing MIPI I3C – the Next-Generation Serial Communication Bus"
Secure your spot https://ow.ly/K7e250Q3psJ
📌Today at 4 PM (CET)
The presentation will provide a technical overview of the interface and explain how it can be used to connect next-generation .

Join Stuart Cording, The  , as he explores the world of stretchable, flexible circuit prototyping with Evan Skelsey (Vol...
31/10/2023

Join Stuart Cording, The , as he explores the world of stretchable, flexible circuit prototyping with Evan Skelsey (Voltera), and an open-source pick and place machine with Stephen Hawes (Opulo). It's a rip-roaring show!
https://ow.ly/FF4r50Q2OEt

GIVEAWAY: Win 1 out of 3 copies of Chris Rose's book, "Embedded Expert's Guide to C: The Secrets to Becoming a Reliable ...
31/10/2023

GIVEAWAY: Win 1 out of 3 copies of Chris Rose's book, "Embedded Expert's Guide to C: The Secrets to Becoming a Reliable Embedded C Expert".
To enter, watch the latest episode of and fill in the form here https://ow.ly/YQkq50Q2yQx

Join Stuart Cording, The  , as he explores the world of stretchable, flexible circuit   with these show’s guests: Evan S...
30/10/2023

Join Stuart Cording, The , as he explores the world of stretchable, flexible circuit with these show’s guests: Evan Skelsey (Voltera) and Stephen Hawes (Opulo)
https://ow.ly/WlPF50Q29a2

Terug in de tijd: De TV-scope, een effectapparaat met buizen en tips voor ontwerpershttps://ow.ly/npNx50Q1V3C
29/10/2023

Terug in de tijd: De TV-scope, een effectapparaat met buizen en tips voor ontwerpers
https://ow.ly/npNx50Q1V3C

Let's take a look back at designs from previous editions of Elektor. Whether you are a pro or newbie to engineering, we have something for you!

🌟 A heartfelt thank you to all our wonderful giveaway participants! 🌟We want to extend our heartfelt gratitude to all of...
27/10/2023

🌟 A heartfelt thank you to all our wonderful giveaway participants! 🌟
We want to extend our heartfelt gratitude to all of you for your incredible enthusiasm!
Every one of the winners has won a new Raspberry Pi 5 Board!
🎉And the winners are ... 🎉

Hans Stuetz
Niels Wetzels
Balthazar Deliers
George Onji
RaabinatorCr

Stay tuned for more exciting giveaways and surprises ahead!

C is still the language of choice for   MCUs, but mistakes are still made due to misunderstandings when using the langua...
25/10/2023

C is still the language of choice for MCUs, but mistakes are still made due to misunderstandings when using the language. Some obvious things, like pointers and de-referencing, lead to mistakes. But even fundamentals are applied incorrectly or not fully understood. To learn what these are and how to avoid them, Stuart Cording the , talks to Chris Rose.
https://ow.ly/EM8x50Q0mlG

C is still the language of choice for programming microcontrollers, but mistakes are still made due to misunderstandings when using the language. Some obviou...

C is still the language of choice for   MCUs, but mistakes are still made due to misunderstandings when using the langua...
24/10/2023

C is still the language of choice for MCUs, but mistakes are still made due to misunderstandings when using the language. Some obvious things, like pointers and de-referencing, lead to mistakes. But even fundamentals are applied incorrectly or not fully understood. To learn what these are and how to avoid them, Stuart Cording the , talks to Chris Rose.
https://ow.ly/XWJg50Q0mlz

C is still the language of choice for programming microcontrollers, but mistakes are still made due to misunderstandings when using the language. Some obviou...

Address


Opening Hours

Monday 09:00 - 17:00
Tuesday 09:00 - 17:00
Wednesday 09:00 - 17:00
Thursday 09:00 - 17:00
Friday 09:00 - 17:00

Alerts

Be the first to know and let us send you an email when MagPi Nederland posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to MagPi Nederland:

Videos

Shortcuts

  • Address
  • Opening Hours
  • Alerts
  • Contact The Business
  • Videos
  • Claim ownership or report listing
  • Want your business to be the top-listed Media Company?

Share

MagPi Magazine nu in het Nederlands!

MagPi gaat op een praktische manier in op de nieuwste ontwikkelingen en trends rondom de Raspberry Pi. Het bevat onder andere reviews, uitgebreide hands-on tutorials en een groot aantal zelfbouwprojecten.