Adjust the focal length of the laser handheld welding machine
Red light adjustment method of SUP metal model
Check out this video for Red light adjustment in laser welding machine! It details the red light adjustment method of the SUP metal model. Whether you're a hobbyist or a professional, this guide will walk you through the process step - by - step, ensuring you can achieve the best results. Don't miss out on this useful knowledge! Watch now and master the adjustment skills.
Red light adjustment method of SUP plastic model
Check out this video for Red light adjustment in laser welding machine! It details the red light adjustment method of the SUP plastic model. Whether you're a hobbyist or a professional, this guide will walk you through the process step - by - step, ensuring you can achieve the best results. Don't miss out on this useful knowledge! Watch now and master the adjustment skills.
How to adjust the red light bias: cleaning head
Please note:
1. Only when the red light is a line, it can be debugged by the following methods. If the red light is a point, please refer to the line change point treatment scheme, because it may be biased when it does not swing.
2. If you see a mass of light from the protective mirror instead of a line, consider whether the mirror is broken.
3. Please make sure that the state of 15V power supply is normal.
I. Installation of orthotics
Please disassemble and install the "calibrator" under the gun head in Figure 1 in the calibration position as shown in Figure 2.
II. Replace the matching red light adjusting lens.
2.1.SUP21C is placed in the protective mirror position with F50 collimating lens.
2.2.SUP22C is placed in the focusing lens position with F60 collimating lens.
[It must be noted that the collimation used above is D20, so please do not directly test it with the fittings (D16) of the original gun head]
Home-Turn off the indicator red light-At this time, the red light is a point, and then adjust it.
III. Setting adjustment
Click on the screen setting page 【 Value of Laser Center Offset Right 】 to enter 【 Offset Correction 】. Enter a positive number to move to the right and a negative number to move to the left. Adjust the parameters according to the actual situation until the red light is in the middle.
After calibration, put the calibrator back, replace the original lens at the same time, and start normal cleaning.
SUP23T Installation of collimating lens
Note:
1. Please pay attention to the site environment when replacing it. It is recommended to remove it and replace it in a relatively good place such as the office.
2. Handle with care during installation, and pay attention to the horizontal placement during installation.
3. Be sure to clean the outside of the gun body
4. The original lens is integrated with a bracket, which is convenient for replacement. Please do not use glue to stick the lens yourself.
SUP23T Installation of focusing lens
Note:
1. Please pay attention to the site environment when replacing it. It is recommended to remove it and replace it in a relatively good place such as the office.
2. Handle with care during installation, and pay attention to the horizontal placement during installation.
3. Be sure to clean the outside of the gun body
4. The original lens is integrated with a bracket, which is convenient for replacement. Please do not use glue to stick the lens yourself.
SUP23T Installation of reflective lens
Note:
1. Please pay attention to the site environment when replacing it. It is recommended to remove it and replace it in a relatively good place such as the office.
2. Handle with care during installation, and pay attention to the horizontal placement during installation.
3. Be sure to clean the outside of the gun body
4.The original lens is integrated with a bracket, which is convenient for replacement. Please do not use glue to stick the lens yourself.
Unleash Precision with Our 3000W Laser Welding Machine!
Fed up with inefficient welding? Check out our 3000W Laser Welding Machine in this video!
High - Power Performance
With 3000W power, it handles diverse materials, from thin sheets to thick metals. High - speed welding cuts production time without sacrificing quality.
Precise Welding
Advanced laser tech ensures micron - level precision, minimizing heat - affected areas and post - weld work. The result? Smooth, flawless seams.
Wide Applications
Suitable for automotive, aerospace, electronics, and jewelry industries. It welds stainless steel, aluminum, copper, and more.
Easy to Operate
Intuitive controls let new operators quickly get the hang of it. Safety features protect both users and equipment.
Click the video below to see its capabilities.
Have questions? Leave a comment or reach out. Let's transform your welding processes!
SUP23T Installation of protective lenses
Note:
1. Please pay attention to the site environment when replacing it. It is recommended to remove it and replace it in a relatively good place such as the office.
2. Handle with care during installation, and pay attention to the horizontal placement during installation.
3. Be sure to clean the outside of the gun body
4. The original lens is integrated with a bracket, which is convenient for replacement. Please do not use glue to stick the lens yourself.
Your Premier Source for Global Laser Equipment Exports!
